Conductivity Measuring Instruments
High-quality conductivity meter with a 4-20mA signal output for forwarding the measured value to a higher-level control system, for example. The measurement is temperature compensated and therefore offers you an accurate measurement result. Also here we have the possibility to offer you an individual design regarding the connection, the LEDs including the measuring range up to a private label. Due to the acrylic glass cover used, the light of the LEDs is widely scattered and the current LED status can be seen from a distance in darker rooms. Quality Made in Germany. Standard LED configuration (1 green LED, 1 red LED): <20 µS/cm = green >20 µS/cm to <40µS/cm = green/red flashing >40 µS/cm = red Technical data: Measuring range: according to your requirements Temperature compensation: Linear 2.2 % / K, reference temperature 25°C Accuracy conductivity: +/-10% of the maximum full scale value Accuracy temperature: +-1.0 °C Limit value display: Optical via LED Analog output: 4-20 mA = 0-50 μS/cm Power supply: 24 VDC +-10% Power consumption: < 2.5W Screw-in thread: according to your requirements Housing: POM (polyoxymethylene) Vision panel: PMMA (acrylic glass) Electrodes: stainless steel 1.457 Dimensions: Diameter 60 mm x 60 mm (top) / 100 mm (total) Gaskets electrodes: EPDM, 28 x 3 mm Gasket housing: EPDM, 50 x 2 mm Application limits: P max: 6 bar; T max: 50 °C Protection class: IP 65*
High-quality conductivity meter with a 4-20mA signal output for forwarding the measured value to a higher-level control system, for example. The measurement is temperature compensated and therefore offers you an accurate measurement result. Also here we have the possibility to offer you an individual design regarding the connection, the LEDs including the measuring range up to a private label. Due to the acrylic glass cover used, the light of the LEDs is widely scattered and the current LED status can be seen from a distance in darker rooms. Quality Made in Germany. LED configuration like requested (1 green LED, 1 red LED): <... µS/cm = green >... µS/cm to <...µS/cm = green/red flashing >... µS/cm = red Technical data: Measuring range: according to your requirements Temperature compensation: Linear 2.2 % / K, reference temperature 25°C Accuracy conductivity: +/-10% of the maximum full scale value Accuracy temperature: +-1.0 °C Limit value display: Optical via LED Analog output: 4-20 mA = 0-... μS/cm (according your measuring range) Power supply: 24 VDC +-10% Power consumption: < 2.5W Screw-in thread: 3/4" Housing: POM (polyoxymethylene) Vision panel: PMMA (acrylic glass) Electrodes: stainless steel 1.457 Dimensions: Diameter 60 mm x 60 mm (top) / 100 mm (total) Gaskets electrodes: EPDM, 28 x 3 mm Gasket housing: EPDM, 50 x 2 mm Application limits: P max: 6 bar; T max: 50 °C Protection class: IP 65*
High-quality conductivity meter with a 4-20mA signal output for forwarding the measured value to a higher-level control system, for example. The measurement is temperature compensated and therefore offers you an accurate measurement result. Also here we have the possibility to offer you an individual design regarding the connection, the LEDs including the measuring range up to a private label. Due to the acrylic glass cover used, the light of the LEDs is widely scattered and the current LED status can be seen from a distance in darker rooms. Quality Made in Germany. LED configuration according your needs (1 green LED, 1 red LED): <... µS/cm = green >... µS/cm to <...µS/cm = green/red flashing >... µS/cm = red Technical data: Measuring range: according your requirements Temperature compensation: Linear 2.2 % / K, reference temperature 25°C Accuracy conductivity: +/-10% of the maximum full scale value Accuracy temperature: +-1.0 °C Limit value display: Optical via LED Analog output: 4-20 mA = 0-... μS/cm (according your measuring range) Power supply: 24 VDC +-10% Power consumption: < 2.5W Screw-in thread: according your requirements Housing: POM (polyoxymethylene) Vision panel: PMMA (acrylic glass) Electrodes: stainless steel 1.457 Dimensions: Diameter 60 mm x 60 mm (top) / 100 mm (total) Gaskets electrodes: EPDM, 28 x 3 mm Gasket housing: EPDM, 50 x 2 mm Application limits: P max: 6 bar; T max: 50 °C Protection class: IP 65*
High-quality conductivity meter with a 4-20mA signal output for forwarding the measured value to a higher-level control system, for example. The measurement is temperature compensated and therefore offers you an accurate measurement result. Also here we have the possibility to offer you an individual design regarding the connection, the LEDs including the measuring range up to a private label. Due to the acrylic glass cover used, the light of the LEDs is widely scattered and the current LED status can be seen from a distance in darker rooms. Quality Made in Germany. Standard LED configuration (1 green LED, 1 red LED): <20 µS/cm = green >20 µS/cm to <40µS/cm = green/red flashing >40 µS/cm = red Technical data: Measuring range: according your requirements Temperature compensation: Linear 2.2 % / K, reference temperature 25°C Accuracy conductivity: +/-10% of the maximum full scale value Accuracy temperature: +-1.0 °C Limit value display: Optical via LED Analog output: 4-20 mA = 0-... μS/cm (according your needed measuring range) Power supply: 24 VDC +-10% Power consumption: < 2.5W Screw-in thread: 3/4" Housing: POM (polyoxymethylene) Vision panel: PMMA (acrylic glass) Electrodes: stainless steel 1.457 Dimensions: Diameter 60 mm x 60 mm (top) / 100 mm (total) Gaskets electrodes: EPDM, 28 x 3 mm Gasket housing: EPDM, 50 x 2 mm Application limits: P max: 6 bar; T max: 50 °C Protection class: IP 65*
Reliable Monitoring of Water Quality at Extremely Low Conductivity High-precision conductivity meter for ultrapure and process water The N-LF5R meter was developed for continuous monitoring of very low electrical conductivities in aqueous solutions. With a measuring range of 0–5 µS/cm, it delivers meaningful readings even with minimal conductivity changes. The integrated 3/4" screw-in measuring cell allows direct installation into the process flow. Its compact design and low power requirement via 9 V DC operation make the N-LF5R highly flexible. The robust IP65 housing protects the device against dust and splash water, ensuring reliable operation even under demanding conditions. Why precise conductivity measurement is particularly important in the low range Even slight deviations in conductivity can determine the quality of the final product or the safety of a system in many processes. The N-LF5R detects the smallest changes in the 0–5 µS/cm range, which can indicate contamination, material degradation, or process deviations. Benefits of the N-LF5R for monitoring ultrapure and process water The N-LF5R conductivity meter enables early detection of even minimal changes in conductivity in ultrapure and process water. This allows contamination, leaks, material leaching, or process deviations to be identified quickly before they lead to quality issues or equipment damage. The integrated screw-in measuring cell allows direct inline measurement, ensuring continuous and reliable readings without sampling. Combined with the robust IP65 housing, the device is ideal for permanent use in industrial applications where high measurement accuracy and operational reliability are critical. Frequently asked questions Are there other measuring ranges available? The standard measuring ranges can be found in the product's drop-down menu. If the measuring range you require is not listed, don't worry. Simply let us know and we will check whether we can configure the item to suit your needs. Are there other thread sizes available? If the desired connection thread is not listed, that's no problem. Let us know your desired thread and we will check whether we can configure the item for you with the appropriate thread. For enquiries, please contact our service department on +49 (0) 5121 7609 99 or at vertrieb@heylneomeris.de Is it possible to label the conductivity meter with my own company logo so that we can sell it ourselves in future? That's no problem. Please provide us with more detailed information so that we can process your enquiry. Please note that the price will change due to the increased effort involved and that the minimum purchase quantity for product labelling is 100 units.
Device for the measurement of the electrical conductivity of aqueous solutions using a two-electrode conductivity cell without temperature compensation. Designed as measuring device with external measuring cell, with or without potential-free relay output available.- Applications: Demineralisation, reverse osmosis, desalination, cooling water recirc., phase separation- Operation at 9V DC via included wall transformer power supply.- Versions with relay output: 1 potential-free relay with reversible mode of action for the relay output- Optical limit indication via LEDs Technical Data- Measuring ranges: 0 - 10 / 100 / 1000 uS/cm, depending on type of device- Indication of limit values: Optical via LEDs, 2 limit values can be set within 0 and 100 % of the measuring range- Versions with relay output: 1 potential-free relay contact, max. 2 A / 250 V AC, 60 W / 62.5 VA- Versions with external measuring cell: For this reason measuring device includes wall brac
Device for the measurement of the electrical conductivity of aqueous solutions using a two-electrode conductivity cell without temperature compensation. Designed as measuring device with external measuring cell, with or without potential-free relay output available.- Applications: Demineralisation, reverse osmosis, desalination, cooling water recirc., phase separation- Operation at 9V DC via included wall transformer power supply.- Versions with relay output: 1 potential-free relay with reversible mode of action for the relay output- Optical limit indication via LEDs Technical Data- Measuring ranges: 0 - 10 / 100 / 1000 uS/cm, depending on type of device- Indication of limit values: Optical via LEDs, 2 limit values can be set within 0 and 100 % of the measuring range- Versions with relay output: 1 potential-free relay contact, max. 2 A / 250 V AC, 60 W / 62.5 VA- Versions with external measuring cell: For this reason measuring device includes wall brac
Device for the measurement of the electrical conductivity of aqueous solutions using a two-electrode conductivity cell without temperature compensation. Designed as measuring device with external measuring cell, with or without potential-free relay output available.- Applications: Demineralisation, reverse osmosis, desalination, cooling water recirc., phase separation- Operation at 9V DC via included wall transformer power supply.- Versions with relay output: 1 potential-free relay with reversible mode of action for the relay output- Optical limit indication via LEDs Technical Data- Measuring ranges: 0 - 10 / 100 / 1000 uS/cm, depending on type of device- Indication of limit values: Optical via LEDs, 2 limit values can be set within 0 and 100 % of the measuring range- Versions with relay output: 1 potential-free relay contact, max. 2 A / 250 V AC, 60 W / 62.5 VA- Versions with external measuring cell: For this reason measuring device includes wall brac
Device for the measurement of the electrical conductivity of aqueous solutions using a two-electrode conductivity cell without temperature compensation. Designed as measuring device with external measuring cell, with or without potential-free relay output available.- Applications: Demineralisation, reverse osmosis, desalination, cooling water recirc., phase separation- Operation at 9V DC via included wall transformer power supply.- Versions with relay output: 1 potential-free relay with reversible mode of action for the relay output- Optical limit indication via LEDs Technical Data- Measuring ranges: 0 - 10 / 100 / 1000 uS/cm, depending on type of device- Indication of limit values: Optical via LEDs, 2 limit values can be set within 0 and 100 % of the measuring range- Versions with relay output: 1 potential-free relay contact, max. 2 A / 250 V AC, 60 W / 62.5 VA- Versions with external measuring cell: For this reason measuring device includes wall brac
Device for the measurement of the electrical conductivity of aqueous solutions using a two-electrode conductivity cell without temperature compensation. Designed as measuring device with external measuring cell, with or without potential-free relay output available.- Applications: Demineralisation, reverse osmosis, desalination, cooling water recirc., phase separation- Operation at 9V DC via included wall transformer power supply.- Versions with relay output: 1 potential-free relay with reversible mode of action for the relay output- Optical limit indication via LEDs Technical Data- Measuring ranges: 0 - 10 / 100 / 1000 uS/cm, depending on type of device- Indication of limit values: Optical via LEDs, 2 limit values can be set within 0 and 100 % of the measuring range- Versions with relay output: 1 potential-free relay contact, max. 2 A / 250 V AC, 60 W / 62.5 VA- Versions with external measuring cell: For this reason measuring device includes wall brac
Device for the measurement of the electrical conductivity of aqueous solutions using a two-electrode conductivity cell without temperature compensation. Designed as measuring device with external measuring cell, with or without potential-free relay output available.- Applications: Demineralisation, reverse osmosis, desalination, cooling water recirc., phase separation- Operation at 9V DC via included wall transformer power supply.- Versions with relay output: 1 potential-free relay with reversible mode of action for the relay output- Optical limit indication via LEDs Technical Data- Measuring ranges: 0 - 10 / 100 / 1000 uS/cm, depending on type of device- Indication of limit values: Optical via LEDs, 2 limit values can be set within 0 and 100 % of the measuring range- Versions with relay output: 1 potential-free relay contact, max. 2 A / 250 V AC, 60 W / 62.5 VA- Versions with external measuring cell: For this reason measuring device includes wall brac
The conductivity measuring package consists of a 3 meter connection cable, a Modbus head transmitter, and the conductivity sensor. Due to the design of the sensor assembly, only the sensor needs to be replaced, when it should be worn out . All other components of this system can be used continuously. For an optimal process integration the NeoTec sensor is delivered with a fitting T-piece. Advantages: preconfigured for NeoTecMaster® modular design industry standard resource friendly
Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions. The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.