Go to homepage
Wishlist
€0.00*

NeoTec Select Sensors sind spezielle Sensoren, zur Überwachung von Wasserqualität und Prozessparametern. Sie werden in Verbindung mit dem NeoTecMaster eingesetzt, um eine zuverlässige Überwachung von pH-Wert, Redoxpotential, Leitfähigkeit, Temperatur, Chlor und anderen Parametern zu gewährleisten.

Sie bieten eine zuverlässige und effektive Möglichkeit, Prozesse zu optimieren und die Einhaltung von Umweltstandards und Vorschriften zu gewährleisten.

Insgesamt bieten die NeoTec Select Sensoren eine zuverlässige und genaue Möglichkeit zur Überwachung von Wasserqualität und Prozessparametern und ermöglichen es Kunden, ihre Prozesse genau zu überwachen und zu optimieren.

Filter
–
Tip
New
0-130 °C - S8 screw head pH electrode without temperature probe - combination electrode JUMO tecLine HD (201021/10-12-04-82-120/000)
0-130 °C - S8 screw head pH electrode without temperature probe - combination electrode JUMO tecLine HD (201021/10-12-04-82-120/000)
Product number: 800072
Diaphragm: PTFE - ring | Electrical connection of the electrode (onto which the cable is plugged): Screw head Pg13.5 (S8) | Measuring resistor (temperature sensor): without
The JUMO "Heavy Duty" pH electrode records the pH value of water and aqueous media. The rugged industrial electrode is designed for the most demanding applications with increased dirt and toxic loads as well as oily media.Advantages:stable and reliable measured values low maintenance and robustextended service lifeSelected version:without temperature sensorS8 N-srew head Pg13,5, PPS materialPTFE ring diaphragmInsertion length 120mm (standard)Type code (can also be found on your electrode): 201021/10-12-04-18-120/841Features: for industrial applications; also in heavy-duty and hygienic version for demanding processes; integrated temperature sensorApplication range:  process measurement; high temperature applications; suspensions; electroplating; lacquers; waste water; ultrapure water; water; always contaminated media; hygienic and sterile applications; boiler feed water If you require other versions of this electrode, please use our configurator and configure the suitable electrode for you. You can download the JUMO data sheet just below our text. You will find our configurator on page 6 of the data sheet. Please note that the delivery time for freely configured electrodes is 5 to 6 weeks.

€256.82*
Details
Tip
New
0-130 °C, PT1000 - Variopin pH electrode - combination electrode JUMO tecLine HD (201021/10-12-04-18-120/841)
0-130 °C, PT1000 - Variopin pH electrode - combination electrode JUMO tecLine HD (201021/10-12-04-18-120/841)
Product number: 800073
Diaphragm: PTFE - ring | Electrical connection of the electrode (onto which the cable is plugged): VarioPin (VP) plug-in head Pg13.5 | Measuring resistor (temperature sensor): PT1000
The JUMO "Heavy Duty" pH electrode records the pH value of water and aqueous media. The rugged industrial electrode is designed for the most demanding applications with increased dirt and toxic loads as well as oily media.Advantages:stable and reliable measured values low maintenance and robustextended service lifeSelected version:PT1000 temperature sensorVarioPin electrode head (always required for versions with temperature sensor)PTFE ring diaphragmInsertion length 120mm (standard)Type code (can also be found on your electrode): 201021/10-12-04-18-120/841Features: for industrial applications; also in heavy-duty and hygienic version for demanding processes; integrated temperature sensorApplication range:  process measurement; high temperature applications; suspensions; electroplating; lacquers; waste water; ultrapure water; water; always contaminated media; hygienic and sterile applications; boiler feed water If you require other versions of this electrode, please use our configurator and configure the suitable electrode for you. You can download the JUMO data sheet just below our text. You will find our configurator on page 6 of the data sheet. Please note that the delivery time for freely configured electrodes is 5 to 6 weeks.

€331.00*
Details
Tip
New
0-130 °C, PT100 - Variopin pH electrode - combination electrode JUMO tecLine HD (201021/10-12-04-18-120/840)
0-130 °C, PT100 - Variopin pH electrode - combination electrode JUMO tecLine HD (201021/10-12-04-18-120/840)
Product number: 800088
Diaphragm: PTFE - ring | Electrical connection of the electrode (onto which the cable is plugged): VarioPin (VP) plug-in head Pg13.5 | Measuring resistor (temperature sensor): PT100
The JUMO "Heavy Duty" pH electrode records the pH value of water and aqueous media. The rugged industrial electrode is designed for the most demanding applications with increased dirt and toxic loads as well as oily media.Advantages:stable and reliable measured values low maintenance and robustextended service lifeSelected version:PT100 temperature sensorVarioPin electrode head (always required for versions with temperature sensor)PTFE ring diaphragmInsertion length 120mm (standard)Type code (can also be found on your electrode): 201021/10-12-04-18-120/840Features: for industrial applications; also in heavy-duty and hygienic version for demanding processes; integrated temperature sensorApplication range:  process measurement; high temperature applications; suspensions; electroplating; lacquers; waste water; ultrapure water; water; always contaminated media; hygienic and sterile applications; boiler feed water If you require other versions of this electrode, please use our configurator and configure the suitable electrode for you. You can download the JUMO data sheet just below our text. You will find our configurator on page 6 of the data sheet. Please note that the delivery time for freely configured electrodes is 5 to 6 weeks.

€329.70*
Details
Tip
Flow cell for pH and ORP electrodes
Flow cell for pH and ORP electrodes
Product number: 891347
Version: 3/4" NPT female thread
Our flow cell kit is a simple and economical means of mounting pH and ORP electrodes for inline applications. Compatible with all 12 mm electrodes.

€31.50*
Details
Tip
Flow cell for pH and ORP electrodes
Flow cell for pH and ORP electrodes
Product number: 891348
Version: 1/2" NPT female thread
Our flow cell kit is a simple and economical means of mounting pH and ORP electrodes for inline applications. Compatible with all 12 mm electrodes.

€31.50*
Details
Tip
New
JUMO tecLine HD pH electrode - combination electrode
JUMO tecLine HD pH electrode - combination electrode
Product number: JUMO_tecLineHD
The JUMO "Heavy Duty" pH electrode records the pH value of water and aqueous media. The rugged industrial electrode is designed for the most demanding applications with increased dirt and toxic loads as well as oily media.Advantages:stable and reliable measured values low maintenance and robustextended service lifeFeatures: for industrial applications; also in heavy-duty and hygienic version for demanding processes; integrated temperature sensorApplication range:  process measurement; high temperature applications; suspensions; electroplating; lacquers; waste water; ultrapure water; water; always contaminated media; hygienic and sterile applications; boiler feed water Use our configurator created for you and configure yourself the suitable electrode. You can download the JUMO data sheet just below our text. You will find our configurator on page 6 of the data sheet.

€215.82*
Details
NeoTec Select Sensor Conductivity modular measuring package with 4-20mA head transmitter for low measuring range
NeoTec Select Sensor Conductivity modular measuring package with 4-20mA head transmitter for low measuring range
Product number: 891016
Head transmitter: 4-20 mA | Tee: 1.5" flow cell with 1" inner thread NPT | measuring range: 0.1-1.000 μS/cm
The conductivity measuring package consists of a 3 meter connection cable, a 4-20mA head transmitter, and the conductivity sensor. Due to the design of the sensor assembly, only the sensor needs to be replaced, when it should be worn out . All other components of this system can be used continuously. For an optimal process integration the NeoTec sensor is delivered with a fitting T-piece. Advantages: preconfigured for NeoTecMaster® modular design industry standard resource friendly

€780.50*
Details
NeoTec Select Sensor Conductivity modular measuring package with Modbus signal output for low measuring range
NeoTec Select Sensor Conductivity modular measuring package with Modbus signal output for low measuring range
Product number: 891017
Head transmitter: Modbus 12-24 VDC | Tee: 1.5" flow cell with 1" inner thread NPT | measuring range: 0.1-500 μS/cm
The conductivity sensor consists of a 3 meter connection cable, a Modbus head transmitter, and the conductivity sensor. Due to the design of the sensor assembly, only the sensor needs to be replaced. All other components of this system can be used continuously. For an optimal process integration the NeoTec sensor is delivered with a fitting T-piece. Advantages:Preconfigured for NeoTecMaster® Modular design Industry standard conserves resources

€780.50*
Details
NeoTec Select Sensor ORP modular measuring package Modbus
NeoTec Select Sensor ORP modular measuring package Modbus
Product number: 891011
Head transmitter: Modbus 12-24 VDC | Tee: 1.5" flow cell with 1" inner thread NPT | measuring range: -2000mV to +2000mV
The modular ORP measuring package consists of a 3 m connection cable, a Modbus head transmitter, the sensor holder and the ORP flat-head electrode. Due to the construction of the sensor only the ORP electrode has to be replaced. All other components of this system can be used continuously. For an optimal process integration the NeoTec Sensor is delivered with a fitting T-piece. Advantages:preconfigured for NeoTecMaster® modular design industry standard resource friendly 

€960.75*
Details
NeoTec Select Sensor pH modular measuring package - Modbus
NeoTec Select Sensor pH modular measuring package - Modbus
Product number: 891010
Head transmitter: Modbus 12-24 VDC | Tee: 1" flow cell with 3/4" inner thread NPT | measuring range: 0 - 14 pH
The modular pH measuring package consists of a 3 m connection cable, a Modbus head transmitter, the sensor holder and the flat-head pH electrode. Due to the design of the sensor assembly, only the pH electrode needs to be replaced. All other components of this system can be used continuously. For optimal process integration, the NeoTec Sensor is supplied with a suitable T-piece.Advantages:preconfigured for NeoTecMaster® modular design industry standard resource friendly

€935.00*
Details
Select ORP Standard 4-20mA
Select ORP Standard 4-20mA
Product number: 890847
Cable length: 3 meters
A ORP sensor from the NeoTec Select Standard product range with 4 - 20 mA module permanently encapsulated in the sensor body.Advantages:Preconfigured for NeoTecMaster® Industry standard Can be used as immersion probe

€551.75*
Details
Select ORP Standard Modbus 12-24 VDC
Select ORP Standard Modbus 12-24 VDC
Product number: 890843
Cable length: 3 meters
The ORP sensor from the NeoTec Select Standard product range with Modbus module permanently encapsulated in the sensor body.Advantages:Preconfigured for NeoTecMaster® Industry standard Can be used as immersion probe

€551.75*
Details
Select ORP- Electrode
Select ORP- Electrode
Product number: 890812

€265.75*
Details
Select pH Standard 4-20mA
Select pH Standard 4-20mA
Product number: 890845
Cable length: 3 meters
A pH sensor from the NeoTec Select Standard product range with 4 - 20 mA module permanently encapsulated in the sensor body.Advantages:Preconfigured for NeoTecMaster® Industry standard Can be used as immersion probe

€551.75*
Details
Select pH Standard Modbus 12-24 VDC
Select pH Standard Modbus 12-24 VDC
Product number: 890839
Cable length: 3 meters
A pH sensor from the NeoTec Select Standard product range with Modbus modul encapsulated in the sensor body.Advantages:Preconfigured for NeoTecMaster® Industry standard Can be used as immersion probe

€536.75*
Details
Select pH- probe with double diaphragm
Select pH- probe with double diaphragm
Product number: 890822
Conductivity in the medium: >50 µS/cm

€240.00*
Details
Tip
Select Toroidal 4-20mA Conductivity Sensor 0- 2.000 mS (0 - 2.000.000 µS)
Select Toroidal 4-20mA Conductivity Sensor 0- 2.000 mS (0 - 2.000.000 µS)
Product number: 890884
Measuring resistor (temperature sensor): PT1000 | Version: 4-20mA (0- 2.000 mS)
Analogue and digital communication for more process visibility• Modbus or 4-20 mA sensor output available• Configuration and calibration can be done using web based software Corrosion, Coating and Fouling Resistant• Noryl body has a wide solvent tolerance and temperature stability to 105°C (used with flow cell 80°C, with integrated 4-20mA output or Modbus 70°C) Mounting• Can be installed in line using the specific flow cell or submersed via the 3/4" MNPT thread Wide Measurement Range• Can measure conductivity from 0 – 2.000.000 μS (0 - 2 S)

€936.75*
Details
Tip
Select Toroidal 4-20mA Conductivity Sensor 0- 500 mS (0 - 500.000 µS)
Select Toroidal 4-20mA Conductivity Sensor 0- 500 mS (0 - 500.000 µS)
Product number: 890883
Measuring resistor (temperature sensor): PT1000 | Version: 4-20mA (0- 500 mS)
Analogue and digital communication for more process visibility• Modbus or 4-20 mA sensor output available• Configuration and calibration can be done using web based software Corrosion, Coating and Fouling Resistant• Noryl body has a wide solvent tolerance and temperature stability to 105°C (used with flow cell 80°C, with integrated 4-20mA output or Modbus 70°C) Mounting• Can be installed in line using the specific flow cell or submersed via the 3/4" MNPT thread Wide Measurement Range• Can measure conductivity from 0 – 500.000 μS (0 - 500 mS)

€936.75*
Details
Tip
Select Toroidal Conductivity Sensor 0- 2 S (0 - 2.000.000 µS)
Select Toroidal Conductivity Sensor 0- 2 S (0 - 2.000.000 µS)
Product number: 890885
Measuring resistor (temperature sensor): PT1000 | Version: Standard (9-wire connection cable)
Analogue and digital communication for more process visibility• Modbus or 4-20 mA sensor output available• Configuration and calibration can be done using web based software Corrosion, Coating and Fouling Resistant• Noryl body has a wide solvent tolerance and temperature stability to 105°C (used with flow cell 80°C, with integrated 4-20mA output or Modbus 70°C) Mounting• Can be installed in line using the specific flow cell or submersed via the 3/4" MNPT thread Wide Measurement Range• Can measure conductivity from 0 – 2.000.000 μS (0 - 2 S)

€700.50*
Details
Tip
Select Toroidal Modbus Conductivity Sensor 0- 2 S (0 - 2.000.000 µS)
Select Toroidal Modbus Conductivity Sensor 0- 2 S (0 - 2.000.000 µS)
Product number: 890881
Measuring resistor (temperature sensor): PT1000 | Version: Modbus
Analogue and digital communication for more process visibility• Modbus or 4-20 mA sensor output available• Configuration and calibration can be done using web based software Corrosion, Coating and Fouling Resistant• Noryl body has a wide solvent tolerance and temperature stability to 105°C (used with flow cell 80°C, with integrated 4-20mA output or Modbus 70°C) Mounting• Can be installed in line using the specific flow cell or submersed via the 3/4" MNPT thread Wide Measurement Range• Can measure conductivity from 0 – 2.000.000 μS (0 - 2 S)

€936.75*
Details
This website uses cookies to ensure the best experience possible. More information...