Spare Parts – Reliable Supply for Your Measurement and Control Devices
For long-term and trouble-free operation of your measurement and control devices, HeylNeomeris offers a comprehensive range of high-quality spare parts. Whether sensors, seals, electronic modules, or mechanical components – you’ll find the right parts for quick and easy repairs.
Examples from our range: drain connections, drain funnels, connection sets, sealing kits, and dosing pumps.
The cover is a replacement part for the DosiClip. It serves as a splash guard for the DosiClip, which is installed in Testomat devices.
Dosing needle for measuring chamber TESTOMAT®808
Spare part dosing pump DosiClip® incl. pressure and suction hose
Spare part dosing pump DosiClip® Vi (with Viton ring) incl. pressure and suction hose
Dosing pump PERIClip for Testomat® Polymer and PO4.Fitting:Set hose connection PERIClip Art.-Nr.: 40359Pump head PERIClip Art.-Nr.: 40362
ID=1.6mm complete2x screws M3x40, M3x501x shaft extension1x spacer plate1x double pump head with hoses1x hose extension1x 1.5 mm Allen keyImportant:After replacement, the pump must be recalibrated in Testomat® 808 SiO2. The adjustment is available from firmware version T808_83-003. Update the firmware of older versions before carrying out the adjustment! (serial numbers lower 253.061)It is important to use water with a silicate content of 0 ppm for this adjustment, otherwise the adjustment of the zero point is faulty and leads to incorrect measurement results. To ensure this, please use the silicate filter cartridge for the T808 SiO2, article 270344, specially developed for this process.(For additional information and notes on the equipment required for the software update, see the operating instructions as well as the "Replacing the pump head in Testomat808 SiO2" document)
Spare part for the Testomat® EVO TH (item no.: 100704)
Chamber holder, complete (without valves) for Testomat® DUO
Feed connector is a spare part for pressure regulator of Testomat® devices for: Testomat 2000®/ Testomat® EVO TH/ Testomat ECO®/ Titromat®
Spare part for candle filter housing of Testomat® 808
Filter intake for pressure regulator of our Testomat® devices Testomat 2000®/ Testomat® EVO TH/ Testomat ECO®/ Titromat®
Spare part for measure chamber of Testomat® devices: Flat gasket 24×2 EPDM 70Two flat gaskets are required for replacement in the measuring chamber.
The flow regulator DN 15, 1/2" is suitable for the NEOMERIS Softmaster RS.
The flow regulator DN 25, 1" is suitable for the NEOMERIS Softmaster RS.
The flow regulator DN 40, 1 1/2 " is suitable for the NEOMERIS Softmaster RS.
The flow regulator DN 50, 2" is suitable for the NEOMERIS Softmaster RS.
The flow regulator DN 65, 2 1/2" is suitable for the NEOMERIS Softmaster RS.