Measure and Display 11 Parameters Simultaneously with Innovative Features, Newly Designed Control Unit and Sensor TechnologyDear customers, we will provide you with the item description in the next few days. You will find the technical data in the form of a table, which will give you a good overview, under the "Specifiactions" tab.  You are also welcome to take a look at the product flyer in the download area, which contains all the important information. Manufacturer article number:3200164500 (30 Meter = U-52G)

Measure and Display 11 Parameters Simultaneously with Innovative Features, Newly Designed Control Unit and Sensor TechnologyDear customers, we will provide you with the item description in the next few days. You will find the technical data in the form of a table, which will give you a good overview, under the "Specifiactions" tab.  You are also welcome to take a look at the product flyer in the download area, which contains all the important information. Manufacturer article number:3200164506 (2 Meter = U-53)

Measure and Display 11 Parameters Simultaneously with Innovative Features, Newly Designed Control Unit and Sensor TechnologyDear customers, we will provide you with the item description in the next few days. You will find the technical data in the form of a table, which will give you a good overview, under the "Specifiactions" tab.  You are also welcome to take a look at the product flyer in the download area, which contains all the important information. Manufacturer article number:3200164508 (30 Meter = U-53)

Measure and Display 11 Parameters Simultaneously with Innovative Features, Newly Designed Control Unit and Sensor TechnologyDear customers, we will provide you with the item description in the next few days. You will find the technical data in the form of a table, which will give you a good overview, under the "Specifiactions" tab.  You are also welcome to take a look at the product flyer in the download area, which contains all the important information. Manufacturer article number:3200164501 (2 Meter = U-52)

Measure and Display 11 Parameters Simultaneously with Innovative Features, Newly Designed Control Unit and Sensor TechnologyDear customers, we will provide you with the item description in the next few days. You will find the technical data in the form of a table, which will give you a good overview, under the "Specifiactions" tab.  You are also welcome to take a look at the product flyer in the download area, which contains all the important information. Manufacturer article number:3200164509 (2 Meter = U-51)

Measure and Display 11 Parameters Simultaneously with Innovative Features, Newly Designed Control Unit and Sensor TechnologyDear customers, we will provide you with the item description in the next few days. You will find the technical data in the form of a table, which will give you a good overview, under the "Specifiactions" tab.  You are also welcome to take a look at the product flyer in the download area, which contains all the important information. Manufacturer article number:3200164504 (10 Meter = U-53G)

JUMO LOGOSCREEN 601 - paperless recorder with touch screen Typ: 706521/08-000-23/000  Basic type extension: without software package  Option 1-3: not assigned  Power supply: AC 110 bis 240 V +10/-15%, 48 bis 63 Hz  Extra codes: not assigned  Simple operation through intuitive touch operation  Up to 2 analogue outputs  Equipped with a PROFINET IO device interface (extra code)  Integrated web server enables online visualisation as on the device  Recording of batch protocols  Limit value monitoring with 24 channels  Optional flow measurement with 2 channels  Optionally with 2 counter inputs (max. 12.5 kHz)  Integration of own applications using structured text (ST code; with extra code)  Automatic data readout via PCA communication software PCC  Compliant data recording in accordance with FDA 21 CFR Part 11 (with extra code)  Tamper detection via digital certificate (with extra code)  PC programmes for data analysis and access control  AMS2750/CQI-9 (extra code)  Use for large operating temperature ranges The paperless recorder graphically displays systems and process statuses and protects process data acquisition against manipulation. Thanks to various connection configurations such as PROFINET, each with 24 analogue and digital inputs and outputs, it can be flexibly adapted to a wide range of requirements. Configuration and operation On the deviceWith the JUMO operating and visualisation concept, operation of the paperless recorder is almost intuitive for the user. The operating actions are carried out via a menu system based on symbols and executed via the touchscreen. The integrated user administration ensures that the paperless recorder is protected against unauthorised access. The basic version supports up to five users with individual access rights. The additional type 888 (FDA 21 CFR-Part 11) makes it possible to manage up to 50 users. With the setup programmeThe paperless recorder can also be configured via the setup programme, whereby some functions are only available within the setup programme, e.g:  Adaptation of the operating language  Assignment of user rights  Creation of process screens  Writing texts (e.g. for batch reports and process screens) The setup programme is installed on a PC with a Windows operating system (7/8/10 - 32 or 64 bit) and communicates with the display driver via USB or Ethernet interface. It is also possible to transfer configuration files to the display driver using a USB memory stick. The user has the option of saving the configuration data as a file and using it for documentation purposes. Operating languageThe device offers a selection of different operating languages. These languages can be edited and exchanged using the setup programme. The following languages are currently available:  German  English  French, German  Spanish  Czech  Chinese  Russian  Italian It is also possible to create your own language versions that are Unicode-capable. Process screen editorThe setup programme enables the user to create 6 customised process screens and transfer them to the paperless recorder. These screens are used to display process data and to enter text and process values. Each process screen can consist of up to 100 objects (images, analogue channels, digital channels, texts, ...). Interfaces USBThe paperless recorder is equipped with two USB interfaces as standard. A USB memory stick can be connected via the host interface on the front. The device interface on the rear (type Micro-B) is used to connect to a PC (for the setup programme or PCC/PCA3000). To ensure IP66 protection at the front, the USB host interface is fitted with a cover. EthernetThe screen driver is equipped with an Ethernet interface as standard, which supports various functions:  Sending e-mails via SMTP server  Time synchronisation via SNTP server  Communication with a PC (setup programme, web server, data archiving with PCC/PCA3000)  Communication with Modbus master/slave The IP address can be configured manually or set automatically by a DHCP server. The use of DNS is also supported. RS232/RS485 interfaces are also available. RS232/RS485This standard interface can be switched between RS232 and RS485 by configuration. It is used for communication with a Modbus master or Modbus slave. It is also intended for connecting a barcode scanner. PROFINET IO deviceThe paperless recorder can optionally be equipped with a PROFINET interface in order to integrate it into a PROFINET network as an IO device. This interface also enables the simultaneous use of standard Ethernet services, making the standard Ethernet interface superfluous. A GSD file (GSDML) is available for the programming system of the IO controller, which describes the properties of the paperless recorder. External inputs via interfaceThe interfaces (Ethernet, RS232/RS485) enable the paperless recorder to access 24 external analogue inputs and 24 external digital inputs. In addition, up to 10 texts for batch reports and 4 event texts with a length of up to 160 characters can be transmitted.In addition, up to 10 texts for batch reports and 4 event texts with a length of up to 160 characters can be transmitted using Modbus TCP and Modbus RTU. Inputs and outputsThe paperless recorder is available in different device variants with analogue and digital inputs and outputs (options). The analogue inputs (maximum 6) are versatile measurement inputs for:  Resistance thermometers,  thermocouples,  resistance potentiometers/WFG,  resistance/potentiometer  Standard signals (current, voltage) Each of the up to 2 analogue outputs can be used flexibly either as a voltage output in the range from 0 to 10 V or as a current output with 0/4 to 20 mA.The digital inputs (maximum 12) and the individually switchable digital inputs/outputs (12) are operated with a voltage of DC 0/24 V.A relay output with changeover contact is available in every device variant, irrespective of the other specifications. Customer-specific linearisationIndividual linearisation according to customer requirements makes it possible to use sensor signals with special characteristics (e.g. PTC/NTC sensors, taking into account the resistance measuring range). Programming is carried out in the setup programme either using your value table with up to 40 value pairs or using a formula (4th order polynomial). The device supports 2 customer-specific linearisations. Data recordingThe measured values are recorded continuously with a sampling cycle of 125 ms. These measured values form the basis for creating reports and checking limit values. The measured values are transferred to the device's working memory depending on the programmable memory cycle and memory value:  Current value  Average value  Maximum value  Minimum value  Min./Max. value The data is saved by the paperless recorder in groups, whereby a maximum of four groups can be assigned to each input. Working memory (SRAM)The data in the SRAM is regularly copied to the internal memory in blocks of 20 kilobytes each. Internal memory (Flasch)When a memory block in the main memory is full, the data is transferred to the internal memory, which has a maximum capacity of 1 GByte. Each write process is monitored in order to recognise errors immediately when saving data. The device continuously monitors the capacity of the internal memory and activates a memory alarm signal when a configurable residual capacity is reached, which can trigger the alarm relay, for example. The memory works on the principle of a ring buffer, so that when the memory is full, older data is automatically overwritten by new data. Data can be retrieved from the internal memory for the history display in the paperless recorder, whereby the history memory has a capacity of 8 MByte. Data transfer to the PCData can be transferred from the paperless recorder to a PC either via a USB memory stick or via one of the interfaces (USB device, Ethernet). Data securityThe data is encrypted and stored in a proprietary format, which ensures a high level of data security. In the event of disconnection from the power supply, the following conditions apply:  Measurement data in the working memory and the time are buffered by a lithium battery (lithium battery life > 7 years) If the lithium battery discharges, the measurement data in the working memory and the time are lost. During battery replacement, the data is buffered for approx. 2 minutes by a storage capacitor. Measurement and configuration data in the internal memory are not lost. The device with the extra code 87 has a tamper detection function. Based on a digital device certificate, it is possible to prove that the register data in the device and during transfer to the data archive have not been manipulated. Recording durationThe maximum recording time is influenced by various factors, in particular the selected storage cycle. If a group with 6 analogue channels is activated in normal operation and the average values (not min/max values) are saved, the values in the table apply. Entries in the event list can reduce the maximum recording duration. ReportsReports (maximum, minimum and average values) can be recorded over defined periods of time for each channel in a group. The configuration is done individually for each group. Batch reportYou can use the paperless recorder to create a batch report for a system. The measurement data, the start, end and duration of the batch can be displayed together with a batch counter and freely definable texts both on the paperless recorder and in the PC evaluation software PCA3000. In addition, a barcode scanner can be used to control the start and stop of the batch and to read in batch texts. Recording GPS dataThe device can receive and record GPS data in NMEA-0183 format via its serial interface. The data from the connected GPS receivers, such as positioning data, is entered cyclically in the event list (group-related) and can therefore be analysed in conjunction with other recorded data. Operating modesThe operating mode can be selected individually for each group. The storage cycle and storage value can be set separately for each operating mode. Up to 4 groups can be recorded with a storage cycle of 125 ms. The operating modes have different priorities: Energy modeEvent operation is activated or deactivated via a control signal such as a digital input, a group or collective alarm. As long as the control signal is active, the device is in event mode, which has the highest priority. Timed operationTimed operation is active daily within an adjustable time window, provided no event operation is active. Normal modeIf the device is not in event or timed operation, normal operation is active. Limit value monitoringUp to 24 analogue values can be monitored using the adjustable limit value monitoring function. If the limit value is exceeded or not reached, an alarm signal is generated which can be used for individual purposes, for example to switch the operating mode from normal to event operation. With the help of an alarm delay, short-term over- or underruns can be faded out so that no alarm signal is triggered. It is also possible to suppress the alarm signal using a digital signal. Both the limit value and the switching differential can be adjusted during parameterisation. Counters/integratorsSix additional internal channels are available, which can be used as:  Counter  integrator  Operating time counter  Recording of a total flow rate can be used. Two high-speed counters with a frequency of up to 12.5 kHz can be realised using digital inputs/outputs 1 and 2 (optionally 3). These optional inputs are also required for flow measurement in order to analyse pulses from a flow transmitter.The counters are controlled by digital signals (counting pulses), while the integrators are operated by analogue signals (the value is integrated according to the selected time base).Operating time counters record the time period while a digital signal is active. The value of the counter/integrator is displayed numerically on the paperless recorder with a maximum of 9 digits. In the event of an overflow, the counter restarts at 0.Various recording periods can be set. A min. and max. alarm can be configured for each counter/integrator. Maths and logic module The maths and logic module (6 channels each) is available as an option. The maths function can be used to link various analogue and Boolean input variables using a freely definable formula with a maximum length of 160 ASCII characters. The output variables are real values. As an alternative to manual formula input, ready-made mathematical functions such as - Difference - ratio - Humidity - Moving average are available. The logic function makes it possible to link different Boolean values using a logic formula that can be up to 600ASCII characters long. The output variables are Boolean values. The maths and logic module is configured exclusively via the setup programme. Structured textThe "Structured text" option (extra code) allows the user to develop a customised application. This application is created using the ST editor, which is part of the setup programme, and uses the "Structured text" PLC programming language. Once completed, the application is transferred to the device and executed continuously. Online debugger functions are available in the ST editor for troubleshooting and testing. FDA-compliant data recordingWith extra code 888, the paperless recorder fully complies with FDA requirements in accordance with 21CFR Part 11. The PC software package (including PCS and PCAT) is required for user administration and commissioning. The device supports up to 50 users with specific rights. A user can sign a completed batch or the registration data of a specific time range with his electronic signature. Even when logging out, a registered user can provide a signature that is then valid for the entire period in which they were registered. Visualisation on the deviceThe paperless recorder offers various display types for visualising the measurement data. The visualisation images after the device is switched on can be selected in the configuration, as can the image that appears when the Home button is confirmed. Furthermore, the colours of the individual channels and the background colour of the analogue curves and digital traces can be set. Web serverThe paperless recorder has a web server function as standard. The web server enables the user to display the following settings, process values and messages with a web browser:  Parameters at user level  Customised process screens  Factory visualisation  Data from the recording function (including the history)  Alarm and event lists The visualisation depends on the web browser used and the PC operating system. PC programmesThe paperless recorder is available with two different basic type extensions:Basic type 1:  Contains the PC programmes o Setup o PCC o PCA3000 Basic type 888:  In addition to the programmes mentioned above, also contains o PCS o PCAT See order details PCA communication software PCCThe PCA communication software PCC is a PC programme developed for Windows operating systems (7/8/10 - 32/65 bit). It is used to read out the data from the paperless recorder. The data can be read out either with a USB memory stick or via the interfaces (USB device, Ethernet). The data can be read out either manually or automatically, for example daily at 11.00 pm. PC evaluation software PCA3000The PC evaluation software PCA3000 is a PC program for Windows operating systems (7/8/10 - 32/64 bit) that is used to manage, archive, visualise and evaluate the data from the paperless recorder. The software recognises the data from various configured devices and saves it automatically in an archive database. Only an identifier (additional description) has to be assigned manually by the user. Users can access specific data records at any time, which can be differentiated using the identifier. It is also possible to restrict the time ranges to be analysed Any analogue and digital channels of a paperless recorder, even from different groups, can be subsequently combined in PCA3000 to form so-called PCA groups. Each group is displayed in its own window, allowing several groups to be displayed and compared on the screen at the same time The saved data can be exported using the export filter so that it can be processed in other programmes such as Excel. The PC evaluation software PCA3000 is network-compatible, which means that several users can access the data from the same archive file (*.177) in a network directory independently of each other. With the PCA300 option "automatic printout", in conjunction with the PCC software, batch data or reports can be automatically output to a printer or made available as a PDF file on the network. The output forms used can be customised. PC Security Manager PCSThe PCS software is used to manage access control for device users and is only available to administrators. This software can only be used with devices with the suffix 888. PC Audit Trail Manager PCATThe software is used to document PC operating actions that lead to changes in the data recording.

JUMO LOGOSCREEN 601 - paperless recorder with touch screen Typ: 706521/08-100-23/000  Basic type extension: without software package  Option 1: Analog / Digital: 2 Analog- und 6 Digitaleingänge , 1 Analogausgang   Option 2 and 3: not assigned  Power supply: AC 110 bis 240 V +10/-15%, 48 bis 63 Hz  Extra codes: not assigned  Simple operation through intuitive touch operation  Up to 2 analogue outputs  Equipped with a PROFINET IO device interface (extra code)  Integrated web server enables online visualisation as on the device  Recording of batch protocols  Limit value monitoring with 24 channels  Optional flow measurement with 2 channels  Optionally with 2 counter inputs (max. 12.5 kHz)  Integration of own applications using structured text (ST code; with extra code)  Automatic data readout via PCA communication software PCC  Compliant data recording in accordance with FDA 21 CFR Part 11 (with extra code)  Tamper detection via digital certificate (with extra code)  PC programmes for data analysis and access control  AMS2750/CQI-9 (extra code)  Use for large operating temperature ranges The paperless recorder graphically displays systems and process statuses and protects process data acquisition against manipulation. Thanks to various connection configurations such as PROFINET, each with 24 analogue and digital inputs and outputs, it can be flexibly adapted to a wide range of requirements. Configuration and operation On the deviceWith the JUMO operating and visualisation concept, operation of the paperless recorder is almost intuitive for the user. The operating actions are carried out via a menu system based on symbols and executed via the touchscreen. The integrated user administration ensures that the paperless recorder is protected against unauthorised access. The basic version supports up to five users with individual access rights. The additional type 888 (FDA 21 CFR-Part 11) makes it possible to manage up to 50 users. With the setup programmeThe paperless recorder can also be configured via the setup programme, whereby some functions are only available within the setup programme, e.g:  Adaptation of the operating language  Assignment of user rights  Creation of process screens  Writing texts (e.g. for batch reports and process screens) The setup programme is installed on a PC with a Windows operating system (7/8/10 - 32 or 64 bit) and communicates with the display driver via USB or Ethernet interface. It is also possible to transfer configuration files to the display driver using a USB memory stick. The user has the option of saving the configuration data as a file and using it for documentation purposes. Operating languageThe device offers a selection of different operating languages. These languages can be edited and exchanged using the setup programme. The following languages are currently available:  German  English  French, German  Spanish  Czech  Chinese  Russian  Italian It is also possible to create your own language versions that are Unicode-capable. Process screen editorThe setup programme enables the user to create 6 customised process screens and transfer them to the paperless recorder. These screens are used to display process data and to enter text and process values. Each process screen can consist of up to 100 objects (images, analogue channels, digital channels, texts, ...). Interfaces USBThe paperless recorder is equipped with two USB interfaces as standard. A USB memory stick can be connected via the host interface on the front. The device interface on the rear (type Micro-B) is used to connect to a PC (for the setup programme or PCC/PCA3000). To ensure IP66 protection at the front, the USB host interface is fitted with a cover. EthernetThe screen driver is equipped with an Ethernet interface as standard, which supports various functions:  Sending e-mails via SMTP server  Time synchronisation via SNTP server  Communication with a PC (setup programme, web server, data archiving with PCC/PCA3000)  Communication with Modbus master/slave The IP address can be configured manually or set automatically by a DHCP server. The use of DNS is also supported. RS232/RS485 interfaces are also available. RS232/RS485This standard interface can be switched between RS232 and RS485 by configuration. It is used for communication with a Modbus master or Modbus slave. It is also intended for connecting a barcode scanner. PROFINET IO deviceThe paperless recorder can optionally be equipped with a PROFINET interface in order to integrate it into a PROFINET network as an IO device. This interface also enables the simultaneous use of standard Ethernet services, making the standard Ethernet interface superfluous. A GSD file (GSDML) is available for the programming system of the IO controller, which describes the properties of the paperless recorder. External inputs via interfaceThe interfaces (Ethernet, RS232/RS485) enable the paperless recorder to access 24 external analogue inputs and 24 external digital inputs. In addition, up to 10 texts for batch reports and 4 event texts with a length of up to 160 characters can be transmitted.In addition, up to 10 texts for batch reports and 4 event texts with a length of up to 160 characters can be transmitted using Modbus TCP and Modbus RTU. Inputs and outputsThe paperless recorder is available in different device variants with analogue and digital inputs and outputs (options). The analogue inputs (maximum 6) are versatile measurement inputs for:  Resistance thermometers,  thermocouples,  resistance potentiometers/WFG,  resistance/potentiometer  Standard signals (current, voltage) Each of the up to 2 analogue outputs can be used flexibly either as a voltage output in the range from 0 to 10 V or as a current output with 0/4 to 20 mA.The digital inputs (maximum 12) and the individually switchable digital inputs/outputs (12) are operated with a voltage of DC 0/24 V.A relay output with changeover contact is available in every device variant, irrespective of the other specifications. Customer-specific linearisationIndividual linearisation according to customer requirements makes it possible to use sensor signals with special characteristics (e.g. PTC/NTC sensors, taking into account the resistance measuring range). Programming is carried out in the setup programme either using your value table with up to 40 value pairs or using a formula (4th order polynomial). The device supports 2 customer-specific linearisations. Data recordingThe measured values are recorded continuously with a sampling cycle of 125 ms. These measured values form the basis for creating reports and checking limit values. The measured values are transferred to the device's working memory depending on the programmable memory cycle and memory value:  Current value  Average value  Maximum value  Minimum value  Min./Max. value The data is saved by the paperless recorder in groups, whereby a maximum of four groups can be assigned to each input. Working memory (SRAM)The data in the SRAM is regularly copied to the internal memory in blocks of 20 kilobytes each. Internal memory (Flasch)When a memory block in the main memory is full, the data is transferred to the internal memory, which has a maximum capacity of 1 GByte. Each write process is monitored in order to recognise errors immediately when saving data. The device continuously monitors the capacity of the internal memory and activates a memory alarm signal when a configurable residual capacity is reached, which can trigger the alarm relay, for example. The memory works on the principle of a ring buffer, so that when the memory is full, older data is automatically overwritten by new data. Data can be retrieved from the internal memory for the history display in the paperless recorder, whereby the history memory has a capacity of 8 MByte. Data transfer to the PCData can be transferred from the paperless recorder to a PC either via a USB memory stick or via one of the interfaces (USB device, Ethernet). Data securityThe data is encrypted and stored in a proprietary format, which ensures a high level of data security. In the event of disconnection from the power supply, the following conditions apply:  Measurement data in the working memory and the time are buffered by a lithium battery (lithium battery life > 7 years) If the lithium battery discharges, the measurement data in the working memory and the time are lost. During battery replacement, the data is buffered for approx. 2 minutes by a storage capacitor. Measurement and configuration data in the internal memory are not lost. The device with the extra code 87 has a tamper detection function. Based on a digital device certificate, it is possible to prove that the register data in the device and during transfer to the data archive have not been manipulated. Recording durationThe maximum recording time is influenced by various factors, in particular the selected storage cycle. If a group with 6 analogue channels is activated in normal operation and the average values (not min/max values) are saved, the values in the table apply. Entries in the event list can reduce the maximum recording duration. ReportsReports (maximum, minimum and average values) can be recorded over defined periods of time for each channel in a group. The configuration is done individually for each group. Batch reportYou can use the paperless recorder to create a batch report for a system. The measurement data, the start, end and duration of the batch can be displayed together with a batch counter and freely definable texts both on the paperless recorder and in the PC evaluation software PCA3000. In addition, a barcode scanner can be used to control the start and stop of the batch and to read in batch texts. Recording GPS dataThe device can receive and record GPS data in NMEA-0183 format via its serial interface. The data from the connected GPS receivers, such as positioning data, is entered cyclically in the event list (group-related) and can therefore be analysed in conjunction with other recorded data. Operating modesThe operating mode can be selected individually for each group. The storage cycle and storage value can be set separately for each operating mode. Up to 4 groups can be recorded with a storage cycle of 125 ms. The operating modes have different priorities: Energy modeEvent operation is activated or deactivated via a control signal such as a digital input, a group or collective alarm. As long as the control signal is active, the device is in event mode, which has the highest priority. Timed operationTimed operation is active daily within an adjustable time window, provided no event operation is active. Normal modeIf the device is not in event or timed operation, normal operation is active. Limit value monitoringUp to 24 analogue values can be monitored using the adjustable limit value monitoring function. If the limit value is exceeded or not reached, an alarm signal is generated which can be used for individual purposes, for example to switch the operating mode from normal to event operation. With the help of an alarm delay, short-term over- or underruns can be faded out so that no alarm signal is triggered. It is also possible to suppress the alarm signal using a digital signal. Both the limit value and the switching differential can be adjusted during parameterisation. Counters/integratorsSix additional internal channels are available, which can be used as:  Counter  integrator  Operating time counter  Recording of a total flow rate can be used. Two high-speed counters with a frequency of up to 12.5 kHz can be realised using digital inputs/outputs 1 and 2 (optionally 3). These optional inputs are also required for flow measurement in order to analyse pulses from a flow transmitter.The counters are controlled by digital signals (counting pulses), while the integrators are operated by analogue signals (the value is integrated according to the selected time base).Operating time counters record the time period while a digital signal is active. The value of the counter/integrator is displayed numerically on the paperless recorder with a maximum of 9 digits. In the event of an overflow, the counter restarts at 0.Various recording periods can be set. A min. and max. alarm can be configured for each counter/integrator. Maths and logic module The maths and logic module (6 channels each) is available as an option. The maths function can be used to link various analogue and Boolean input variables using a freely definable formula with a maximum length of 160 ASCII characters. The output variables are real values. As an alternative to manual formula input, ready-made mathematical functions such as - Difference - ratio - Humidity - Moving average are available. The logic function makes it possible to link different Boolean values using a logic formula that can be up to 600ASCII characters long. The output variables are Boolean values. The maths and logic module is configured exclusively via the setup programme. Structured textThe "Structured text" option (extra code) allows the user to develop a customised application. This application is created using the ST editor, which is part of the setup programme, and uses the "Structured text" PLC programming language. Once completed, the application is transferred to the device and executed continuously. Online debugger functions are available in the ST editor for troubleshooting and testing. FDA-compliant data recordingWith extra code 888, the paperless recorder fully complies with FDA requirements in accordance with 21CFR Part 11. The PC software package (including PCS and PCAT) is required for user administration and commissioning. The device supports up to 50 users with specific rights. A user can sign a completed batch or the registration data of a specific time range with his electronic signature. Even when logging out, a registered user can provide a signature that is then valid for the entire period in which they were registered. Visualisation on the deviceThe paperless recorder offers various display types for visualising the measurement data. The visualisation images after the device is switched on can be selected in the configuration, as can the image that appears when the Home button is confirmed. Furthermore, the colours of the individual channels and the background colour of the analogue curves and digital traces can be set. Web serverThe paperless recorder has a web server function as standard. The web server enables the user to display the following settings, process values and messages with a web browser:  Parameters at user level  Customised process screens  Factory visualisation  Data from the recording function (including the history)  Alarm and event lists The visualisation depends on the web browser used and the PC operating system. PC programmesThe paperless recorder is available with two different basic type extensions:Basic type 1:  Contains the PC programmes o Setup o PCC o PCA3000 Basic type 888:  In addition to the programmes mentioned above, also contains o PCS o PCAT See order details PCA communication software PCCThe PCA communication software PCC is a PC programme developed for Windows operating systems (7/8/10 - 32/65 bit). It is used to read out the data from the paperless recorder. The data can be read out either with a USB memory stick or via the interfaces (USB device, Ethernet). The data can be read out either manually or automatically, for example daily at 11.00 pm. PC evaluation software PCA3000The PC evaluation software PCA3000 is a PC program for Windows operating systems (7/8/10 - 32/64 bit) that is used to manage, archive, visualise and evaluate the data from the paperless recorder. The software recognises the data from various configured devices and saves it automatically in an archive database. Only an identifier (additional description) has to be assigned manually by the user. Users can access specific data records at any time, which can be differentiated using the identifier. It is also possible to restrict the time ranges to be analysed Any analogue and digital channels of a paperless recorder, even from different groups, can be subsequently combined in PCA3000 to form so-called PCA groups. Each group is displayed in its own window, allowing several groups to be displayed and compared on the screen at the same time The saved data can be exported using the export filter so that it can be processed in other programmes such as Excel. The PC evaluation software PCA3000 is network-compatible, which means that several users can access the data from the same archive file (*.177) in a network directory independently of each other. With the PCA300 option "automatic printout", in conjunction with the PCC software, batch data or reports can be automatically output to a printer or made available as a PDF file on the network. The output forms used can be customised. PC Security Manager PCSThe PCS software is used to manage access control for device users and is only available to administrators. This software can only be used with devices with the suffix 888. PC Audit Trail Manager PCATThe software is used to document PC operating actions that lead to changes in the data recording.

JUMO LOGOSCREEN 601 - paperless recorder with touch screen Typ: 706521/18-100-23/000 Basic type extension: with software package (setup programme incl. USB cable, PC evaluation software PCA3000, PCA communication software PCC; in conjunction with the extra code: " FDA 21 CFR Part 11 with digital certificate" additionally with the software PC Security Manager PCS and PC Audit Trail Manager PCAT Option 1: Analogue/digital: 3 analogue and 6 digital inputs, 1 analogue output Option 2 und3: not assigned Power supply: AC 110 bis 240 V +10/-15%, 48 bis 63 Hz Extra codes: not assigned Simple operation through intuitive touch operation Up to 2 analogue outputs Equipped with a PROFINET IO device interface (extra code) Integrated web server enables online visualisation as on the device Recording of batch protocols Limit value monitoring with 24 channels Optional flow measurement with 2 channels Optionally with 2 counter inputs (max. 12.5 kHz) Integration of own applications using structured text (ST code; with extra code) Automatic data readout via PCA communication software PCC Compliant data recording in accordance with FDA 21 CFR Part 11 (with extra code) Tamper detection via digital certificate (with extra code) PC programmes for data analysis and access control AMS2750/CQI-9 (extra code) Use for large operating temperature ranges The paperless recorder graphically displays systems and process statuses and protects process data acquisition against manipulation. Thanks to various connection configurations such as PROFINET, each with 24 analogue and digital inputs and outputs, it can be flexibly adapted to a wide range of requirements. Configuration and operation On the deviceWith the JUMO operating and visualisation concept, operation of the paperless recorder is almost intuitive for the user. The operating actions are carried out via a menu system based on symbols and executed via the touchscreen. The integrated user administration ensures that the paperless recorder is protected against unauthorised access. The basic version supports up to five users with individual access rights. The additional type 888 (FDA 21 CFR-Part 11) makes it possible to manage up to 50 users. With the setup programmeThe paperless recorder can also be configured via the setup programme, whereby some functions are only available within the setup programme, e.g:  Adaptation of the operating language  Assignment of user rights  Creation of process screens  Writing texts (e.g. for batch reports and process screens) The setup programme is installed on a PC with a Windows operating system (7/8/10 - 32 or 64 bit) and communicates with the display driver via USB or Ethernet interface. It is also possible to transfer configuration files to the display driver using a USB memory stick. The user has the option of saving the configuration data as a file and using it for documentation purposes. Operating languageThe device offers a selection of different operating languages. These languages can be edited and exchanged using the setup programme. The following languages are currently available:  German  English  French, German  Spanish  Czech  Chinese  Russian  Italian It is also possible to create your own language versions that are Unicode-capable. Process screen editorThe setup programme enables the user to create 6 customised process screens and transfer them to the paperless recorder. These screens are used to display process data and to enter text and process values. Each process screen can consist of up to 100 objects (images, analogue channels, digital channels, texts, ...). Interfaces USBThe paperless recorder is equipped with two USB interfaces as standard. A USB memory stick can be connected via the host interface on the front. The device interface on the rear (type Micro-B) is used to connect to a PC (for the setup programme or PCC/PCA3000). To ensure IP66 protection at the front, the USB host interface is fitted with a cover. EthernetThe screen driver is equipped with an Ethernet interface as standard, which supports various functions:  Sending e-mails via SMTP server  Time synchronisation via SNTP server  Communication with a PC (setup programme, web server, data archiving with PCC/PCA3000)  Communication with Modbus master/slave The IP address can be configured manually or set automatically by a DHCP server. The use of DNS is also supported. RS232/RS485 interfaces are also available. RS232/RS485This standard interface can be switched between RS232 and RS485 by configuration. It is used for communication with a Modbus master or Modbus slave. It is also intended for connecting a barcode scanner. PROFINET IO deviceThe paperless recorder can optionally be equipped with a PROFINET interface in order to integrate it into a PROFINET network as an IO device. This interface also enables the simultaneous use of standard Ethernet services, making the standard Ethernet interface superfluous. A GSD file (GSDML) is available for the programming system of the IO controller, which describes the properties of the paperless recorder. External inputs via interfaceThe interfaces (Ethernet, RS232/RS485) enable the paperless recorder to access 24 external analogue inputs and 24 external digital inputs. In addition, up to 10 texts for batch reports and 4 event texts with a length of up to 160 characters can be transmitted.In addition, up to 10 texts for batch reports and 4 event texts with a length of up to 160 characters can be transmitted using Modbus TCP and Modbus RTU. Inputs and outputsThe paperless recorder is available in different device variants with analogue and digital inputs and outputs (options). The analogue inputs (maximum 6) are versatile measurement inputs for:  Resistance thermometers,  thermocouples,  resistance potentiometers/WFG,  resistance/potentiometer  Standard signals (current, voltage) Each of the up to 2 analogue outputs can be used flexibly either as a voltage output in the range from 0 to 10 V or as a current output with 0/4 to 20 mA.The digital inputs (maximum 12) and the individually switchable digital inputs/outputs (12) are operated with a voltage of DC 0/24 V.A relay output with changeover contact is available in every device variant, irrespective of the other specifications. Customer-specific linearisationIndividual linearisation according to customer requirements makes it possible to use sensor signals with special characteristics (e.g. PTC/NTC sensors, taking into account the resistance measuring range). Programming is carried out in the setup programme either using your value table with up to 40 value pairs or using a formula (4th order polynomial). The device supports 2 customer-specific linearisations. Data recordingThe measured values are recorded continuously with a sampling cycle of 125 ms. These measured values form the basis for creating reports and checking limit values. The measured values are transferred to the device's working memory depending on the programmable memory cycle and memory value:  Current value  Average value  Maximum value  Minimum value  Min./Max. value The data is saved by the paperless recorder in groups, whereby a maximum of four groups can be assigned to each input. Working memory (SRAM)The data in the SRAM is regularly copied to the internal memory in blocks of 20 kilobytes each. Internal memory (Flasch)When a memory block in the main memory is full, the data is transferred to the internal memory, which has a maximum capacity of 1 GByte. Each write process is monitored in order to recognise errors immediately when saving data. The device continuously monitors the capacity of the internal memory and activates a memory alarm signal when a configurable residual capacity is reached, which can trigger the alarm relay, for example. The memory works on the principle of a ring buffer, so that when the memory is full, older data is automatically overwritten by new data. Data can be retrieved from the internal memory for the history display in the paperless recorder, whereby the history memory has a capacity of 8 MByte. Data transfer to the PCData can be transferred from the paperless recorder to a PC either via a USB memory stick or via one of the interfaces (USB device, Ethernet). Data securityThe data is encrypted and stored in a proprietary format, which ensures a high level of data security. In the event of disconnection from the power supply, the following conditions apply:  Measurement data in the working memory and the time are buffered by a lithium battery (lithium battery life > 7 years) If the lithium battery discharges, the measurement data in the working memory and the time are lost. During battery replacement, the data is buffered for approx. 2 minutes by a storage capacitor. Measurement and configuration data in the internal memory are not lost. The device with the extra code 87 has a tamper detection function. Based on a digital device certificate, it is possible to prove that the register data in the device and during transfer to the data archive have not been manipulated. Recording durationThe maximum recording time is influenced by various factors, in particular the selected storage cycle. If a group with 6 analogue channels is activated in normal operation and the average values (not min/max values) are saved, the values in the table apply. Entries in the event list can reduce the maximum recording duration. ReportsReports (maximum, minimum and average values) can be recorded over defined periods of time for each channel in a group. The configuration is done individually for each group. Batch reportYou can use the paperless recorder to create a batch report for a system. The measurement data, the start, end and duration of the batch can be displayed together with a batch counter and freely definable texts both on the paperless recorder and in the PC evaluation software PCA3000. In addition, a barcode scanner can be used to control the start and stop of the batch and to read in batch texts. Recording GPS dataThe device can receive and record GPS data in NMEA-0183 format via its serial interface. The data from the connected GPS receivers, such as positioning data, is entered cyclically in the event list (group-related) and can therefore be analysed in conjunction with other recorded data. Operating modesThe operating mode can be selected individually for each group. The storage cycle and storage value can be set separately for each operating mode. Up to 4 groups can be recorded with a storage cycle of 125 ms. The operating modes have different priorities: Energy modeEvent operation is activated or deactivated via a control signal such as a digital input, a group or collective alarm. As long as the control signal is active, the device is in event mode, which has the highest priority. Timed operationTimed operation is active daily within an adjustable time window, provided no event operation is active. Normal modeIf the device is not in event or timed operation, normal operation is active. Limit value monitoringUp to 24 analogue values can be monitored using the adjustable limit value monitoring function. If the limit value is exceeded or not reached, an alarm signal is generated which can be used for individual purposes, for example to switch the operating mode from normal to event operation. With the help of an alarm delay, short-term over- or underruns can be faded out so that no alarm signal is triggered. It is also possible to suppress the alarm signal using a digital signal. Both the limit value and the switching differential can be adjusted during parameterisation. Counters/integratorsSix additional internal channels are available, which can be used as:  Counter  integrator  Operating time counter  Recording of a total flow rate can be used. Two high-speed counters with a frequency of up to 12.5 kHz can be realised using digital inputs/outputs 1 and 2 (optionally 3). These optional inputs are also required for flow measurement in order to analyse pulses from a flow transmitter.The counters are controlled by digital signals (counting pulses), while the integrators are operated by analogue signals (the value is integrated according to the selected time base).Operating time counters record the time period while a digital signal is active. The value of the counter/integrator is displayed numerically on the paperless recorder with a maximum of 9 digits. In the event of an overflow, the counter restarts at 0.Various recording periods can be set. A min. and max. alarm can be configured for each counter/integrator. Maths and logic module The maths and logic module (6 channels each) is available as an option. The maths function can be used to link various analogue and Boolean input variables using a freely definable formula with a maximum length of 160 ASCII characters. The output variables are real values. As an alternative to manual formula input, ready-made mathematical functions such as - Difference - ratio - Humidity - Moving average are available. The logic function makes it possible to link different Boolean values using a logic formula that can be up to 600ASCII characters long. The output variables are Boolean values. The maths and logic module is configured exclusively via the setup programme. Structured textThe "Structured text" option (extra code) allows the user to develop a customised application. This application is created using the ST editor, which is part of the setup programme, and uses the "Structured text" PLC programming language. Once completed, the application is transferred to the device and executed continuously. Online debugger functions are available in the ST editor for troubleshooting and testing. FDA-compliant data recordingWith extra code 888, the paperless recorder fully complies with FDA requirements in accordance with 21CFR Part 11. The PC software package (including PCS and PCAT) is required for user administration and commissioning. The device supports up to 50 users with specific rights. A user can sign a completed batch or the registration data of a specific time range with his electronic signature. Even when logging out, a registered user can provide a signature that is then valid for the entire period in which they were registered. Visualisation on the deviceThe paperless recorder offers various display types for visualising the measurement data. The visualisation images after the device is switched on can be selected in the configuration, as can the image that appears when the Home button is confirmed. Furthermore, the colours of the individual channels and the background colour of the analogue curves and digital traces can be set. Web serverThe paperless recorder has a web server function as standard. The web server enables the user to display the following settings, process values and messages with a web browser:  Parameters at user level  Customised process screens  Factory visualisation  Data from the recording function (including the history)  Alarm and event lists The visualisation depends on the web browser used and the PC operating system. PC programmesThe paperless recorder is available with two different basic type extensions:Basic type 1:  Contains the PC programmes o Setup o PCC o PCA3000 Basic type 888:  In addition to the programmes mentioned above, also contains o PCS o PCAT See order details PCA communication software PCCThe PCA communication software PCC is a PC programme developed for Windows operating systems (7/8/10 - 32/65 bit). It is used to read out the data from the paperless recorder. The data can be read out either with a USB memory stick or via the interfaces (USB device, Ethernet). The data can be read out either manually or automatically, for example daily at 11.00 pm. PC evaluation software PCA3000The PC evaluation software PCA3000 is a PC program for Windows operating systems (7/8/10 - 32/64 bit) that is used to manage, archive, visualise and evaluate the data from the paperless recorder. The software recognises the data from various configured devices and saves it automatically in an archive database. Only an identifier (additional description) has to be assigned manually by the user. Users can access specific data records at any time, which can be differentiated using the identifier. It is also possible to restrict the time ranges to be analysed Any analogue and digital channels of a paperless recorder, even from different groups, can be subsequently combined in PCA3000 to form so-called PCA groups. Each group is displayed in its own window, allowing several groups to be displayed and compared on the screen at the same time The saved data can be exported using the export filter so that it can be processed in other programmes such as Excel. The PC evaluation software PCA3000 is network-compatible, which means that several users can access the data from the same archive file (*.177) in a network directory independently of each other. With the PCA300 option "automatic printout", in conjunction with the PCC software, batch data or reports can be automatically output to a printer or made available as a PDF file on the network. The output forms used can be customised. PC Security Manager PCSThe PCS software is used to manage access control for device users and is only available to administrators. This software can only be used with devices with the suffix 888. PC Audit Trail Manager PCATThe software is used to document PC operating actions that lead to changes in the data recording.

JUMO LOGOSCREEN 601 - paperless recorder with touch screen Typ: 706521/08-110-23/000  Basic type extension: without software package  Option 1: Analogue/digital : 3 analogue and 6 digital inputs, 1 analogue output  Option 2: Analogue/digital : 3 analogue and 6 digital inputs, 1 analogue output  Option 3: not assigned  Power supply: AC 110 bis 240 V +10/-15%, 48 bis 63 Hz  Extra codes: not assigned  Simple operation through intuitive touch operation  Up to 2 analogue outputs  Equipped with a PROFINET IO device interface (extra code)  Integrated web server enables online visualisation as on the device  Recording of batch protocols  Limit value monitoring with 24 channels  Optional flow measurement with 2 channels  Optionally with 2 counter inputs (max. 12.5 kHz)  Integration of own applications using structured text (ST code; with extra code)  Automatic data readout via PCA communication software PCC  Compliant data recording in accordance with FDA 21 CFR Part 11 (with extra code)  Tamper detection via digital certificate (with extra code)  PC programmes for data analysis and access control  AMS2750/CQI-9 (extra code)  Use for large operating temperature ranges The paperless recorder graphically displays systems and process statuses and protects process data acquisition against manipulation. Thanks to various connection configurations such as PROFINET, each with 24 analogue and digital inputs and outputs, it can be flexibly adapted to a wide range of requirements. Configuration and operation On the deviceWith the JUMO operating and visualisation concept, operation of the paperless recorder is almost intuitive for the user. The operating actions are carried out via a menu system based on symbols and executed via the touchscreen. The integrated user administration ensures that the paperless recorder is protected against unauthorised access. The basic version supports up to five users with individual access rights. The additional type 888 (FDA 21 CFR-Part 11) makes it possible to manage up to 50 users. With the setup programmeThe paperless recorder can also be configured via the setup programme, whereby some functions are only available within the setup programme, e.g:  Adaptation of the operating language  Assignment of user rights  Creation of process screens  Writing texts (e.g. for batch reports and process screens) The setup programme is installed on a PC with a Windows operating system (7/8/10 - 32 or 64 bit) and communicates with the display driver via USB or Ethernet interface. It is also possible to transfer configuration files to the display driver using a USB memory stick. The user has the option of saving the configuration data as a file and using it for documentation purposes. Operating languageThe device offers a selection of different operating languages. These languages can be edited and exchanged using the setup programme. The following languages are currently available:  German  English  French, German  Spanish  Czech  Chinese  Russian  Italian It is also possible to create your own language versions that are Unicode-capable. Process screen editorThe setup programme enables the user to create 6 customised process screens and transfer them to the paperless recorder. These screens are used to display process data and to enter text and process values. Each process screen can consist of up to 100 objects (images, analogue channels, digital channels, texts, ...). Interfaces USBThe paperless recorder is equipped with two USB interfaces as standard. A USB memory stick can be connected via the host interface on the front. The device interface on the rear (type Micro-B) is used to connect to a PC (for the setup programme or PCC/PCA3000). To ensure IP66 protection at the front, the USB host interface is fitted with a cover. EthernetThe screen driver is equipped with an Ethernet interface as standard, which supports various functions:  Sending e-mails via SMTP server  Time synchronisation via SNTP server  Communication with a PC (setup programme, web server, data archiving with PCC/PCA3000)  Communication with Modbus master/slave The IP address can be configured manually or set automatically by a DHCP server. The use of DNS is also supported. RS232/RS485 interfaces are also available. RS232/RS485This standard interface can be switched between RS232 and RS485 by configuration. It is used for communication with a Modbus master or Modbus slave. It is also intended for connecting a barcode scanner. PROFINET IO deviceThe paperless recorder can optionally be equipped with a PROFINET interface in order to integrate it into a PROFINET network as an IO device. This interface also enables the simultaneous use of standard Ethernet services, making the standard Ethernet interface superfluous. A GSD file (GSDML) is available for the programming system of the IO controller, which describes the properties of the paperless recorder. External inputs via interfaceThe interfaces (Ethernet, RS232/RS485) enable the paperless recorder to access 24 external analogue inputs and 24 external digital inputs. In addition, up to 10 texts for batch reports and 4 event texts with a length of up to 160 characters can be transmitted.In addition, up to 10 texts for batch reports and 4 event texts with a length of up to 160 characters can be transmitted using Modbus TCP and Modbus RTU. Inputs and outputsThe paperless recorder is available in different device variants with analogue and digital inputs and outputs (options). The analogue inputs (maximum 6) are versatile measurement inputs for:  Resistance thermometers,  thermocouples,  resistance potentiometers/WFG,  resistance/potentiometer  Standard signals (current, voltage) Each of the up to 2 analogue outputs can be used flexibly either as a voltage output in the range from 0 to 10 V or as a current output with 0/4 to 20 mA.The digital inputs (maximum 12) and the individually switchable digital inputs/outputs (12) are operated with a voltage of DC 0/24 V.A relay output with changeover contact is available in every device variant, irrespective of the other specifications. Customer-specific linearisationIndividual linearisation according to customer requirements makes it possible to use sensor signals with special characteristics (e.g. PTC/NTC sensors, taking into account the resistance measuring range). Programming is carried out in the setup programme either using your value table with up to 40 value pairs or using a formula (4th order polynomial). The device supports 2 customer-specific linearisations. Data recordingThe measured values are recorded continuously with a sampling cycle of 125 ms. These measured values form the basis for creating reports and checking limit values. The measured values are transferred to the device's working memory depending on the programmable memory cycle and memory value:  Current value  Average value  Maximum value  Minimum value  Min./Max. value The data is saved by the paperless recorder in groups, whereby a maximum of four groups can be assigned to each input. Working memory (SRAM)The data in the SRAM is regularly copied to the internal memory in blocks of 20 kilobytes each. Internal memory (Flasch)When a memory block in the main memory is full, the data is transferred to the internal memory, which has a maximum capacity of 1 GByte. Each write process is monitored in order to recognise errors immediately when saving data. The device continuously monitors the capacity of the internal memory and activates a memory alarm signal when a configurable residual capacity is reached, which can trigger the alarm relay, for example. The memory works on the principle of a ring buffer, so that when the memory is full, older data is automatically overwritten by new data. Data can be retrieved from the internal memory for the history display in the paperless recorder, whereby the history memory has a capacity of 8 MByte. Data transfer to the PCData can be transferred from the paperless recorder to a PC either via a USB memory stick or via one of the interfaces (USB device, Ethernet). Data securityThe data is encrypted and stored in a proprietary format, which ensures a high level of data security. In the event of disconnection from the power supply, the following conditions apply:  Measurement data in the working memory and the time are buffered by a lithium battery (lithium battery life > 7 years) If the lithium battery discharges, the measurement data in the working memory and the time are lost. During battery replacement, the data is buffered for approx. 2 minutes by a storage capacitor. Measurement and configuration data in the internal memory are not lost. The device with the extra code 87 has a tamper detection function. Based on a digital device certificate, it is possible to prove that the register data in the device and during transfer to the data archive have not been manipulated. Recording durationThe maximum recording time is influenced by various factors, in particular the selected storage cycle. If a group with 6 analogue channels is activated in normal operation and the average values (not min/max values) are saved, the values in the table apply. Entries in the event list can reduce the maximum recording duration. ReportsReports (maximum, minimum and average values) can be recorded over defined periods of time for each channel in a group. The configuration is done individually for each group. Batch reportYou can use the paperless recorder to create a batch report for a system. The measurement data, the start, end and duration of the batch can be displayed together with a batch counter and freely definable texts both on the paperless recorder and in the PC evaluation software PCA3000. In addition, a barcode scanner can be used to control the start and stop of the batch and to read in batch texts. Recording GPS dataThe device can receive and record GPS data in NMEA-0183 format via its serial interface. The data from the connected GPS receivers, such as positioning data, is entered cyclically in the event list (group-related) and can therefore be analysed in conjunction with other recorded data. Operating modesThe operating mode can be selected individually for each group. The storage cycle and storage value can be set separately for each operating mode. Up to 4 groups can be recorded with a storage cycle of 125 ms. The operating modes have different priorities: Energy modeEvent operation is activated or deactivated via a control signal such as a digital input, a group or collective alarm. As long as the control signal is active, the device is in event mode, which has the highest priority. Timed operationTimed operation is active daily within an adjustable time window, provided no event operation is active. Normal modeIf the device is not in event or timed operation, normal operation is active. Limit value monitoringUp to 24 analogue values can be monitored using the adjustable limit value monitoring function. If the limit value is exceeded or not reached, an alarm signal is generated which can be used for individual purposes, for example to switch the operating mode from normal to event operation. With the help of an alarm delay, short-term over- or underruns can be faded out so that no alarm signal is triggered. It is also possible to suppress the alarm signal using a digital signal. Both the limit value and the switching differential can be adjusted during parameterisation. Counters/integratorsSix additional internal channels are available, which can be used as:  Counter  integrator  Operating time counter  Recording of a total flow rate can be used. Two high-speed counters with a frequency of up to 12.5 kHz can be realised using digital inputs/outputs 1 and 2 (optionally 3). These optional inputs are also required for flow measurement in order to analyse pulses from a flow transmitter.The counters are controlled by digital signals (counting pulses), while the integrators are operated by analogue signals (the value is integrated according to the selected time base).Operating time counters record the time period while a digital signal is active. The value of the counter/integrator is displayed numerically on the paperless recorder with a maximum of 9 digits. In the event of an overflow, the counter restarts at 0.Various recording periods can be set. A min. and max. alarm can be configured for each counter/integrator. Maths and logic module The maths and logic module (6 channels each) is available as an option. The maths function can be used to link various analogue and Boolean input variables using a freely definable formula with a maximum length of 160 ASCII characters. The output variables are real values. As an alternative to manual formula input, ready-made mathematical functions such as - Difference - ratio - Humidity - Moving average are available. The logic function makes it possible to link different Boolean values using a logic formula that can be up to 600ASCII characters long. The output variables are Boolean values. The maths and logic module is configured exclusively via the setup programme. Structured textThe "Structured text" option (extra code) allows the user to develop a customised application. This application is created using the ST editor, which is part of the setup programme, and uses the "Structured text" PLC programming language. Once completed, the application is transferred to the device and executed continuously. Online debugger functions are available in the ST editor for troubleshooting and testing. FDA-compliant data recordingWith extra code 888, the paperless recorder fully complies with FDA requirements in accordance with 21CFR Part 11. The PC software package (including PCS and PCAT) is required for user administration and commissioning. The device supports up to 50 users with specific rights. A user can sign a completed batch or the registration data of a specific time range with his electronic signature. Even when logging out, a registered user can provide a signature that is then valid for the entire period in which they were registered. Visualisation on the deviceThe paperless recorder offers various display types for visualising the measurement data. The visualisation images after the device is switched on can be selected in the configuration, as can the image that appears when the Home button is confirmed. Furthermore, the colours of the individual channels and the background colour of the analogue curves and digital traces can be set. Web serverThe paperless recorder has a web server function as standard. The web server enables the user to display the following settings, process values and messages with a web browser:  Parameters at user level  Customised process screens  Factory visualisation  Data from the recording function (including the history)  Alarm and event lists The visualisation depends on the web browser used and the PC operating system. PC programmesThe paperless recorder is available with two different basic type extensions:Basic type 1:  Contains the PC programmes o Setup o PCC o PCA3000 Basic type 888:  In addition to the programmes mentioned above, also contains o PCS o PCAT See order details PCA communication software PCCThe PCA communication software PCC is a PC programme developed for Windows operating systems (7/8/10 - 32/65 bit). It is used to read out the data from the paperless recorder. The data can be read out either with a USB memory stick or via the interfaces (USB device, Ethernet). The data can be read out either manually or automatically, for example daily at 11.00 pm. PC evaluation software PCA3000The PC evaluation software PCA3000 is a PC program for Windows operating systems (7/8/10 - 32/64 bit) that is used to manage, archive, visualise and evaluate the data from the paperless recorder. The software recognises the data from various configured devices and saves it automatically in an archive database. Only an identifier (additional description) has to be assigned manually by the user. Users can access specific data records at any time, which can be differentiated using the identifier. It is also possible to restrict the time ranges to be analysed Any analogue and digital channels of a paperless recorder, even from different groups, can be subsequently combined in PCA3000 to form so-called PCA groups. Each group is displayed in its own window, allowing several groups to be displayed and compared on the screen at the same time The saved data can be exported using the export filter so that it can be processed in other programmes such as Excel. The PC evaluation software PCA3000 is network-compatible, which means that several users can access the data from the same archive file (*.177) in a network directory independently of each other. With the PCA300 option "automatic printout", in conjunction with the PCC software, batch data or reports can be automatically output to a printer or made available as a PDF file on the network. The output forms used can be customised. PC Security Manager PCSThe PCS software is used to manage access control for device users and is only available to administrators. This software can only be used with devices with the suffix 888. PC Audit Trail Manager PCATThe software is used to document PC operating actions that lead to changes in the data recording.

JUMO LOGOSCREEN 601 - paperless recorder with touch screen Typ: 706521/18-110-23/000  Basic type extension: with software package (setup programme incl. USB cable, PC evaluation software PCA3000, PCA communication software PCC; in conjunction with the extra code: " FDA 21 CFR Part 11 with digital certificate" additionally with the software PC Security Manager PCS and PC Audit Trail Manager PCAT  Option 1: Analogue/digital : 3 analogue and 6 digital inputs, 1 analogue output  Option 2:Analogue/digital : 3 analogue and 6 digital inputs, 1 analogue output  Option 3: not assigned  Power supply: AC 110 bis 240 V +10/-15%, 48 bis 63 Hz  Extra codes: not assigned  Simple operation through intuitive touch operation  Up to 2 analogue outputs  Equipped with a PROFINET IO device interface (extra code)  Integrated web server enables online visualisation as on the device  Recording of batch protocols  Limit value monitoring with 24 channels  Optional flow measurement with 2 channels  Optionally with 2 counter inputs (max. 12.5 kHz)  Integration of own applications using structured text (ST code; with extra code)  Automatic data readout via PCA communication software PCC  Compliant data recording in accordance with FDA 21 CFR Part 11 (with extra code)  Tamper detection via digital certificate (with extra code)  PC programmes for data analysis and access control  AMS2750/CQI-9 (extra code)  Use for large operating temperature ranges The paperless recorder graphically displays systems and process statuses and protects process data acquisition against manipulation. Thanks to various connection configurations such as PROFINET, each with 24 analogue and digital inputs and outputs, it can be flexibly adapted to a wide range of requirements. Configuration and operation On the deviceWith the JUMO operating and visualisation concept, operation of the paperless recorder is almost intuitive for the user. The operating actions are carried out via a menu system based on symbols and executed via the touchscreen. The integrated user administration ensures that the paperless recorder is protected against unauthorised access. The basic version supports up to five users with individual access rights. The additional type 888 (FDA 21 CFR-Part 11) makes it possible to manage up to 50 users. With the setup programmeThe paperless recorder can also be configured via the setup programme, whereby some functions are only available within the setup programme, e.g:  Adaptation of the operating language  Assignment of user rights  Creation of process screens  Writing texts (e.g. for batch reports and process screens) The setup programme is installed on a PC with a Windows operating system (7/8/10 - 32 or 64 bit) and communicates with the display driver via USB or Ethernet interface. It is also possible to transfer configuration files to the display driver using a USB memory stick. The user has the option of saving the configuration data as a file and using it for documentation purposes. Operating languageThe device offers a selection of different operating languages. These languages can be edited and exchanged using the setup programme. The following languages are currently available:  German  English  French, German  Spanish  Czech  Chinese  Russian  Italian It is also possible to create your own language versions that are Unicode-capable. Process screen editorThe setup programme enables the user to create 6 customised process screens and transfer them to the paperless recorder. These screens are used to display process data and to enter text and process values. Each process screen can consist of up to 100 objects (images, analogue channels, digital channels, texts, ...). Interfaces USBThe paperless recorder is equipped with two USB interfaces as standard. A USB memory stick can be connected via the host interface on the front. The device interface on the rear (type Micro-B) is used to connect to a PC (for the setup programme or PCC/PCA3000). To ensure IP66 protection at the front, the USB host interface is fitted with a cover. EthernetThe screen driver is equipped with an Ethernet interface as standard, which supports various functions:  Sending e-mails via SMTP server  Time synchronisation via SNTP server  Communication with a PC (setup programme, web server, data archiving with PCC/PCA3000)  Communication with Modbus master/slave The IP address can be configured manually or set automatically by a DHCP server. The use of DNS is also supported. RS232/RS485 interfaces are also available. RS232/RS485This standard interface can be switched between RS232 and RS485 by configuration. It is used for communication with a Modbus master or Modbus slave. It is also intended for connecting a barcode scanner. PROFINET IO deviceThe paperless recorder can optionally be equipped with a PROFINET interface in order to integrate it into a PROFINET network as an IO device. This interface also enables the simultaneous use of standard Ethernet services, making the standard Ethernet interface superfluous. A GSD file (GSDML) is available for the programming system of the IO controller, which describes the properties of the paperless recorder. External inputs via interfaceThe interfaces (Ethernet, RS232/RS485) enable the paperless recorder to access 24 external analogue inputs and 24 external digital inputs. In addition, up to 10 texts for batch reports and 4 event texts with a length of up to 160 characters can be transmitted.In addition, up to 10 texts for batch reports and 4 event texts with a length of up to 160 characters can be transmitted using Modbus TCP and Modbus RTU. Inputs and outputsThe paperless recorder is available in different device variants with analogue and digital inputs and outputs (options). The analogue inputs (maximum 6) are versatile measurement inputs for:  Resistance thermometers,  thermocouples,  resistance potentiometers/WFG,  resistance/potentiometer  Standard signals (current, voltage) Each of the up to 2 analogue outputs can be used flexibly either as a voltage output in the range from 0 to 10 V or as a current output with 0/4 to 20 mA.The digital inputs (maximum 12) and the individually switchable digital inputs/outputs (12) are operated with a voltage of DC 0/24 V.A relay output with changeover contact is available in every device variant, irrespective of the other specifications. Customer-specific linearisationIndividual linearisation according to customer requirements makes it possible to use sensor signals with special characteristics (e.g. PTC/NTC sensors, taking into account the resistance measuring range). Programming is carried out in the setup programme either using your value table with up to 40 value pairs or using a formula (4th order polynomial). The device supports 2 customer-specific linearisations. Data recordingThe measured values are recorded continuously with a sampling cycle of 125 ms. These measured values form the basis for creating reports and checking limit values. The measured values are transferred to the device's working memory depending on the programmable memory cycle and memory value:  Current value  Average value  Maximum value  Minimum value  Min./Max. value The data is saved by the paperless recorder in groups, whereby a maximum of four groups can be assigned to each input. Working memory (SRAM)The data in the SRAM is regularly copied to the internal memory in blocks of 20 kilobytes each. Internal memory (Flasch)When a memory block in the main memory is full, the data is transferred to the internal memory, which has a maximum capacity of 1 GByte. Each write process is monitored in order to recognise errors immediately when saving data. The device continuously monitors the capacity of the internal memory and activates a memory alarm signal when a configurable residual capacity is reached, which can trigger the alarm relay, for example. The memory works on the principle of a ring buffer, so that when the memory is full, older data is automatically overwritten by new data. Data can be retrieved from the internal memory for the history display in the paperless recorder, whereby the history memory has a capacity of 8 MByte. Data transfer to the PCData can be transferred from the paperless recorder to a PC either via a USB memory stick or via one of the interfaces (USB device, Ethernet). Data securityThe data is encrypted and stored in a proprietary format, which ensures a high level of data security. In the event of disconnection from the power supply, the following conditions apply: Measurement data in the working memory and the time are buffered by a lithium battery (lithium battery life > 7 years) If the lithium battery discharges, the measurement data in the working memory and the time are lost. During battery replacement, the data is buffered for approx. 2 minutes by a storage capacitor. Measurement and configuration data in the internal memory are not lost. The device with the extra code 87 has a tamper detection function. Based on a digital device certificate, it is possible to prove that the register data in the device and during transfer to the data archive have not been manipulated. Recording durationThe maximum recording time is influenced by various factors, in particular the selected storage cycle. If a group with 6 analogue channels is activated in normal operation and the average values (not min/max values) are saved, the values in the table apply. Entries in the event list can reduce the maximum recording duration. ReportsReports (maximum, minimum and average values) can be recorded over defined periods of time for each channel in a group. The configuration is done individually for each group. Batch reportYou can use the paperless recorder to create a batch report for a system. The measurement data, the start, end and duration of the batch can be displayed together with a batch counter and freely definable texts both on the paperless recorder and in the PC evaluation software PCA3000. In addition, a barcode scanner can be used to control the start and stop of the batch and to read in batch texts. Recording GPS dataThe device can receive and record GPS data in NMEA-0183 format via its serial interface. The data from the connected GPS receivers, such as positioning data, is entered cyclically in the event list (group-related) and can therefore be analysed in conjunction with other recorded data. Operating modesThe operating mode can be selected individually for each group. The storage cycle and storage value can be set separately for each operating mode. Up to 4 groups can be recorded with a storage cycle of 125 ms. The operating modes have different priorities: Energy modeEvent operation is activated or deactivated via a control signal such as a digital input, a group or collective alarm. As long as the control signal is active, the device is in event mode, which has the highest priority. Timed operationTimed operation is active daily within an adjustable time window, provided no event operation is active. Normal modeIf the device is not in event or timed operation, normal operation is active. Limit value monitoringUp to 24 analogue values can be monitored using the adjustable limit value monitoring function. If the limit value is exceeded or not reached, an alarm signal is generated which can be used for individual purposes, for example to switch the operating mode from normal to event operation. With the help of an alarm delay, short-term over- or underruns can be faded out so that no alarm signal is triggered. It is also possible to suppress the alarm signal using a digital signal. Both the limit value and the switching differential can be adjusted during parameterisation. Counters/integratorsSix additional internal channels are available, which can be used as:  Counter  integrator  Operating time counter  Recording of a total flow rate can be used. Two high-speed counters with a frequency of up to 12.5 kHz can be realised using digital inputs/outputs 1 and 2 (optionally 3). These optional inputs are also required for flow measurement in order to analyse pulses from a flow transmitter.The counters are controlled by digital signals (counting pulses), while the integrators are operated by analogue signals (the value is integrated according to the selected time base).Operating time counters record the time period while a digital signal is active. The value of the counter/integrator is displayed numerically on the paperless recorder with a maximum of 9 digits. In the event of an overflow, the counter restarts at 0.Various recording periods can be set. A min. and max. alarm can be configured for each counter/integrator. Maths and logic module The maths and logic module (6 channels each) is available as an option. The maths function can be used to link various analogue and Boolean input variables using a freely definable formula with a maximum length of 160 ASCII characters. The output variables are real values. As an alternative to manual formula input, ready-made mathematical functions such as - Difference - ratio - Humidity - Moving average are available. The logic function makes it possible to link different Boolean values using a logic formula that can be up to 600ASCII characters long. The output variables are Boolean values. The maths and logic module is configured exclusively via the setup programme. Structured textThe "Structured text" option (extra code) allows the user to develop a customised application. This application is created using the ST editor, which is part of the setup programme, and uses the "Structured text" PLC programming language. Once completed, the application is transferred to the device and executed continuously. Online debugger functions are available in the ST editor for troubleshooting and testing. FDA-compliant data recordingWith extra code 888, the paperless recorder fully complies with FDA requirements in accordance with 21CFR Part 11. The PC software package (including PCS and PCAT) is required for user administration and commissioning. The device supports up to 50 users with specific rights. A user can sign a completed batch or the registration data of a specific time range with his electronic signature. Even when logging out, a registered user can provide a signature that is then valid for the entire period in which they were registered. Visualisation on the deviceThe paperless recorder offers various display types for visualising the measurement data. The visualisation images after the device is switched on can be selected in the configuration, as can the image that appears when the Home button is confirmed. Furthermore, the colours of the individual channels and the background colour of the analogue curves and digital traces can be set. Web serverThe paperless recorder has a web server function as standard. The web server enables the user to display the following settings, process values and messages with a web browser:  Parameters at user level  Customised process screens  Factory visualisation  Data from the recording function (including the history)  Alarm and event lists The visualisation depends on the web browser used and the PC operating system. PC programmesThe paperless recorder is available with two different basic type extensions:Basic type 1:  Contains the PC programmes o Setup o PCC o PCA3000 Basic type 888:  In addition to the programmes mentioned above, also contains o PCS o PCAT See order details PCA communication software PCCThe PCA communication software PCC is a PC programme developed for Windows operating systems (7/8/10 - 32/65 bit). It is used to read out the data from the paperless recorder. The data can be read out either with a USB memory stick or via the interfaces (USB device, Ethernet). The data can be read out either manually or automatically, for example daily at 11.00 pm. PC evaluation software PCA3000The PC evaluation software PCA3000 is a PC program for Windows operating systems (7/8/10 - 32/64 bit) that is used to manage, archive, visualise and evaluate the data from the paperless recorder. The software recognises the data from various configured devices and saves it automatically in an archive database. Only an identifier (additional description) has to be assigned manually by the user. Users can access specific data records at any time, which can be differentiated using the identifier. It is also possible to restrict the time ranges to be analysed Any analogue and digital channels of a paperless recorder, even from different groups, can be subsequently combined in PCA3000 to form so-called PCA groups. Each group is displayed in its own window, allowing several groups to be displayed and compared on the screen at the same time The saved data can be exported using the export filter so that it can be processed in other programmes such as Excel. The PC evaluation software PCA3000 is network-compatible, which means that several users can access the data from the same archive file (*.177) in a network directory independently of each other. With the PCA300 option "automatic printout", in conjunction with the PCC software, batch data or reports can be automatically output to a printer or made available as a PDF file on the network. The output forms used can be customised. PC Security Manager PCSThe PCS software is used to manage access control for device users and is only available to administrators. This software can only be used with devices with the suffix 888. PC Audit Trail Manager PCATThe software is used to document PC operating actions that lead to changes in the data recording.

BlackLine pH/ORP electrodes with plastic shaft and fixed protection basket.Selected version: Without temperature sensor (not available for this series, only for Jumo tecLine and tecLine HD series)Screw head S8 Pg13.5 with fixed two meter cable and BNC connectorGlass fibre diaphragm Plastic shaft PEI Fitting length 120mm (standard) Type code (can also be found on your electrode): Type 201010/65-22-65-2000-76-120/837 ; part-no. 00424950 The electrodes of the JUMO BlackLine series are high-quality measuring sensors with a favorable price/performance ratio.Active part pH The JUMO BlackLine plastic electrodes with fixed protection basket are equipped with the low-resistance JUMO UW glass. This guarantees fast and reliable measurement results. Active part redox The robust platinum tip ensures reliable measurements and is also easy to clean. Reference system The Black Line plastic shaft version PEI uses a polymerised KCl solid electrolyte. This is ideally suited for measurements in aqueous media. For measurements in media with fewer ions or at high flow rates, the electrolyte can be equipped with an optional "salt reservoir" to increase the service life. A polymerized KCl solid electrolyte is also used with this electrode, and the JUMO cartridge discharge system, which has been tried and tested for years, is used as the reference system. Here, the electrolyte remains free of silver ions over the lifetime of the sensor and is therefore less susceptible to electrode poisons. The JUMO BlackLine has a high-quality ceramic diaphragm. The shaft is made of black PPO and has a permanently integrated protective basket. Optionally, the electrodes can be supplied in a storage container (quiver). This is recommended if the sensor is only used sporadically, for refreshing the sensor after longer, intensive use or for longer storage periods. All sensors can be supplied as OEM versions on request. Special versions on request. Areas of applicationDrinking water monitoring and treatmentSwimming poolAquaristics (also seawater aquaristics)Greenhouse technology Lightly polluted industrial, process and waste water Rainwater, pond water and surface water hand-held meters Not recommended forgalvanic water treatmentindustrial process and waste waterultrapure watertherapeutic bathsbiotechnologysterilisation processes

BlackLine pH/ORP electrodes with plastic shaft and fixed protection basket.Selected version: Without temperature sensor (not available for this series, only for Jumo tecLine and tecLine HD series)2 meter fixed cable with BNC plug, electrode head without threadGlass fibre diaphragm Plastic shaft PEI Fitting length 120mm (standard) Type code (can also be found on your electrode): Type 201010/65-22-45-2000-76-120/837 ; part-no. 00417301 The electrodes of the JUMO BlackLine series are high-quality measuring sensors with a favorable price/performance ratio.Active part pH The JUMO BlackLine plastic electrodes with fixed protection basket are equipped with the low-resistance JUMO UW glass. This guarantees fast and reliable measurement results. Active part redox The robust platinum tip ensures reliable measurements and is also easy to clean. Reference system The Black Line plastic shaft version PEI uses a polymerised KCl solid electrolyte. This is ideally suited for measurements in aqueous media. For measurements in media with fewer ions or at high flow rates, the electrolyte can be equipped with an optional "salt reservoir" to increase the service life. A polymerized KCl solid electrolyte is also used with this electrode, and the JUMO cartridge discharge system, which has been tried and tested for years, is used as the reference system. Here, the electrolyte remains free of silver ions over the lifetime of the sensor and is therefore less susceptible to electrode poisons. The JUMO BlackLine has a high-quality ceramic diaphragm. The shaft is made of black PPO and has a permanently integrated protective basket. Optionally, the electrodes can be supplied in a storage container (quiver). This is recommended if the sensor is only used sporadically, for refreshing the sensor after longer, intensive use or for longer storage periods. All sensors can be supplied as OEM versions on request. Special versions on request. Areas of applicationDrinking water monitoring and treatmentSwimming poolAquaristics (also seawater aquaristics)Greenhouse technology Lightly polluted industrial, process and waste water Rainwater, pond water and surface water hand-held meters Not recommended forgalvanic water treatmentindustrial process and waste waterultrapure watertherapeutic bathsbiotechnologysterilisation processes

BlackLine pH/ORP electrodes with plastic shaft and fixed protection basket.Selected version: Without temperature sensor (not available for this series, only for Jumo tecLine and tecLine HD series)Screw head S8 Pg13.5 with fixed two meter cable and BNC connectorGlass fibre diaphragm Plastic shaft PEI Fitting length 120mm (standard) Type code (can also be found on your electrode): Type 201005/65-18-65-2000-76-120/837 ; part-no. 00424828 The electrodes of the JUMO BlackLine series are high-quality measuring sensors with a favorable price/performance ratio.Active part pH The JUMO BlackLine plastic electrodes with fixed protection basket are equipped with the low-resistance JUMO UW glass. This guarantees fast and reliable measurement results. Active part redox The robust platinum tip ensures reliable measurements and is also easy to clean. Reference system The Black Line plastic shaft version PEI uses a polymerised KCl solid electrolyte. This is ideally suited for measurements in aqueous media. For measurements in media with fewer ions or at high flow rates, the electrolyte can be equipped with an optional "salt reservoir" to increase the service life. A polymerized KCl solid electrolyte is also used with this electrode, and the JUMO cartridge discharge system, which has been tried and tested for years, is used as the reference system. Here, the electrolyte remains free of silver ions over the lifetime of the sensor and is therefore less susceptible to electrode poisons. The JUMO BlackLine has a high-quality ceramic diaphragm. The shaft is made of black PPO and has a permanently integrated protective basket. Optionally, the electrodes can be supplied in a storage container (quiver). This is recommended if the sensor is only used sporadically, for refreshing the sensor after longer, intensive use or for longer storage periods. All sensors can be supplied as OEM versions on request. Special versions on request. Areas of applicationDrinking water monitoring and treatmentSwimming poolAquaristics (also seawater aquaristics)Greenhouse technology Lightly polluted industrial, process and waste water Rainwater, pond water and surface water hand-held meters Not recommended forgalvanic water treatmentindustrial process and waste waterultrapure watertherapeutic bathsbiotechnologysterilisation processes

BlackLine pH/ORP electrodes with plastic shaft and fixed protection basket.Selected version: Without temperature sensor (not available for this series, only for Jumo tecLine and tecLine HD series)2 meter fixed cable with BNC plug, electrode head without threadGlass fibre diaphragm Plastic shaft PEI Fitting length 120mm (standard) Type code (can also be found on your electrode): Type 201005/65-18-45-2000-76-120/837 ; part-no. 00417300 The electrodes of the JUMO BlackLine series are high-quality measuring sensors with a favorable price/performance ratio.Active part pH The JUMO BlackLine plastic electrodes with fixed protection basket are equipped with the low-resistance JUMO UW glass. This guarantees fast and reliable measurement results. Active part redox The robust platinum tip ensures reliable measurements and is also easy to clean. Reference system The Black Line plastic shaft version PEI uses a polymerised KCl solid electrolyte. This is ideally suited for measurements in aqueous media. For measurements in media with fewer ions or at high flow rates, the electrolyte can be equipped with an optional "salt reservoir" to increase the service life. A polymerized KCl solid electrolyte is also used with this electrode, and the JUMO cartridge discharge system, which has been tried and tested for years, is used as the reference system. Here, the electrolyte remains free of silver ions over the lifetime of the sensor and is therefore less susceptible to electrode poisons. The JUMO BlackLine has a high-quality ceramic diaphragm. The shaft is made of black PPO and has a permanently integrated protective basket. Optionally, the electrodes can be supplied in a storage container (quiver). This is recommended if the sensor is only used sporadically, for refreshing the sensor after longer, intensive use or for longer storage periods. All sensors can be supplied as OEM versions on request. Special versions on request. Areas of applicationDrinking water monitoring and treatmentSwimming poolAquaristics (also seawater aquaristics)Greenhouse technology Lightly polluted industrial, process and waste water Rainwater, pond water and surface water hand-held meters Not recommended forgalvanic water treatmentindustrial process and waste waterultrapure watertherapeutic bathsbiotechnologysterilisation processes

BlackLine pH/ORP electrodes with plastic shaft and fixed protection basket.Selected version: Without temperature sensor (not available for this series, only for Jumo tecLine and tecLine HD series)Screw head S8 Pg13.5 Glass fibre diaphragm Plastic shaft PEI Fitting length 120mm (standard) Type code (can also be found on your electrode): Type 201005/65-18-22-0000-00-120/837 ; part-no. 00419812 The electrodes of the JUMO BlackLine series are high-quality measuring sensors with a favorable price/performance ratio.Active part pH The JUMO BlackLine plastic electrodes with fixed protection basket are equipped with the low-resistance JUMO UW glass. This guarantees fast and reliable measurement results. Active part redox The robust platinum tip ensures reliable measurements and is also easy to clean. Reference system The Black Line plastic shaft version PEI uses a polymerised KCl solid electrolyte. This is ideally suited for measurements in aqueous media. For measurements in media with fewer ions or at high flow rates, the electrolyte can be equipped with an optional "salt reservoir" to increase the service life. A polymerized KCl solid electrolyte is also used with this electrode, and the JUMO cartridge discharge system, which has been tried and tested for years, is used as the reference system. Here, the electrolyte remains free of silver ions over the lifetime of the sensor and is therefore less susceptible to electrode poisons. The JUMO BlackLine has a high-quality ceramic diaphragm. The shaft is made of black PPO and has a permanently integrated protective basket. Optionally, the electrodes can be supplied in a storage container (quiver). This is recommended if the sensor is only used sporadically, for refreshing the sensor after longer, intensive use or for longer storage periods. All sensors can be supplied as OEM versions on request. Special versions on request. Areas of applicationDrinking water monitoring and treatmentSwimming poolAquaristics (also seawater aquaristics)Greenhouse technology Lightly polluted industrial, process and waste water Rainwater, pond water and surface water hand-held meters Not recommended forgalvanic water treatmentindustrial process and waste waterultrapure watertherapeutic bathsbiotechnologysterilisation processes

Contact resistance thermometer with mounting hole Protective fitting aluminium Typ: 902550/10-386-1003-1-11-2500/000  Temperature range from -50 to +260°C (PTFE)  1× Pt100 in two-wire circuit  Tolerance class according to DIN EN 60751: Class B (standard)  Connection cable end: Wire end ferrules to DIN 46228 Part 4 (standard)  Connection length in mm: 2500 mm  Extra code: without  Suitable for round and flat surfaces  Quick and uncomplicated installation  with protective fittings made of various materials  Low thermal mass  Optimum heat transfer from the measuring point to the sensor Contact resistance thermometers are ideal for precise temperature measurements on closed pipe systems and other round or flat surfaces. The uncomplicated mounting with tensioning straps or hose clamps eliminates the need for mechanical processing of the measuring point. Indirect temperature measurement guarantees interference-free temperature measurement, unaffected by flow, pressure or chemical influences. Due to the low thermal mass of the measurement object, the influence is kept to a minimum. Heat-conducting paste is available as an option to optimise heat transfer. Large temperature differences between the measured medium and the environment are directly reflected in the measurement; additional insulation is recommended here. A Pt100 temperature sensor in accordance with DIN EN 60751 Class B is installed as standard in a two-wire circuit, but variants with Pt500, Pt1000 are also possible. 

Contact resistance thermometer with mounting hole Stainless steel protective fitting Typ: 902550/11-386-1003-1-11-2500/000  Temperature range from -50 to +260°C (PTFE)  1× Pt100 in two-wire circuit  Tolerance class according to DIN EN 60751: Class B (standard)  Connection cable end: Wire end ferrules to DIN 46228 Part 4 (standard)  Connection length in mm: 2500 mm  Extra code: without Suitable for round and flat surfaces  Quick and uncomplicated installation  with protective fittings made of various materials  Low thermal mass  Optimum heat transfer from the measuring point to the sensor Contact resistance thermometers are ideal for precise temperature measurements on closed pipe systems and other round or flat surfaces. The uncomplicated mounting with tensioning straps or hose clamps eliminates the need for mechanical processing of the measuring point. Indirect temperature measurement guarantees interference-free temperature measurement, unaffected by flow, pressure or chemical influences. Due to the low thermal mass of the measurement object, the influence is kept to a minimum. Heat-conducting paste is available as an option to optimise heat transfer. Large temperature differences between the measured medium and the environment are directly reflected in the measurement; additional insulation is recommended here. A Pt100 temperature sensor in accordance with DIN EN 60751 Class B is installed as standard in a two-wire circuit, but variants with Pt500, Pt1000 are also possible. 

Contact resistance thermometer with mounting hole Stainless steel protective fitting Typ: 902550/30-378-1003-1-11-2500/315,  Temperature range from -50 to +260°C (PTFE)  1× Pt100 in two-wire circuit  Tolerance class according to DIN EN 60751: Class B (standard)  Connection cable end: Wire end ferrules to DIN 46228 Part 4 (standard)  Connection length in mm: 2500 mm  Extra code: Spring bend protection  Suitable for round and flat surfaces  Quick and uncomplicated installation  with protective fittings made of various materials  Low thermal mass  Optimum heat transfer from the measuring point to the sensor Contact resistance thermometers are ideal for precise temperature measurements on closed pipe systems and other round or flat surfaces. The uncomplicated mounting with clamping straps or hose clamps eliminates the need for mechanical processing of the measuring point.Indirect temperature measurement guarantees interference-free temperature measurement, unaffected by flow, pressure or chemical influences. Due to the low thermal mass of the measurement object, the influence is kept to a minimum. Heat-conducting paste is optionally available to optimise heat transfer.Large temperature differences between the measured medium and the environment are directly reflected in the measurement; additional insulation is recommended here.A Pt100 temperature sensor in accordance with DIN EN 6 

Contact resistance thermometer with mounting hole Protective fitting aluminium Typ: 902550/31-730-1003-1-11-2500/000  Temperature range from -5 to +105°C (PVC)  1× Pt100 in two-wire circuit  Tolerance class according to DIN EN 60751: Class B (standard)  Connection cable end: Wire end ferrules to DIN 46228 Part 4 (standard)  Connection length in mm: 2500 mm  Extra code: without  Suitable for round and flat surfaces  Quick and uncomplicated installation  with protective fittings made of various materials  Low thermal mass  Optimum heat transfer from the measuring point to the sensor Contact resistance thermometers are ideal for precise temperature measurements on closed pipe systems and other round or flat surfaces. The uncomplicated mounting with clamping straps or hose clamps eliminates the need for mechanical processing of the measuring point.Indirect temperature measurement guarantees interference-free temperature measurement, unaffected by flow, pressure or chemical influences. Due to the low thermal mass of the measurement object, the influence is kept to a minimum. Heat-conducting paste is optionally available to optimise heat transfer.Large temperature differences between the measured medium and the environment are directly reflected in the measurement; additional insulation is recommended here.A Pt100 temperature sensor in accordance with DIN EN 60751 Class B in a two-wire circuit is fitted as standard, but variants with Pt500, Pt1000 are also possible. 

Contact resistance thermometer with mounting hole Protective fitting aluminium (D 10x26 mm) Typ: 902550/31-378-1003-1-11-2500/000  Temperature range from -50 to +180°C (Silicon)  1× Pt100 in two-wire circuit  Tolerance class according to DIN EN 60751: Class B (standard)  Connection cable end: Wire end ferrules to DIN 46228 Part 4 (standard)  Connection length in mm: 2500 mm  Extra code: without  Suitable for round and flat surfaces  Quick and uncomplicated installation  with protective fittings made of various materials  Low thermal mass  Optimum heat transfer from the measuring point to the sensor Contact resistance thermometers are ideal for precise temperature measurements on closed pipe systems and other round or flat surfaces. The uncomplicated mounting with clamping straps or hose clamps eliminates the need for mechanical processing of the measuring point.Indirect temperature measurement guarantees interference-free temperature measurement, unaffected by flow, pressure or chemical influences. Due to the low thermal mass of the measurement object, the influence is kept to a minimum. Heat-conducting paste is optionally available to optimise heat transfer.Large temperature differences between the measured medium and the environment are directly reflected in the measurement; additional insulation is recommended here.A Pt100 temperature sensor in accordance with DIN EN 60751 Class B in a two-wire circuit is fitted as standard, but variants with Pt500, Pt1000 are also possible. 

Contact resistance thermometer with mounting hole Protective fitting aluminium Typ: 902550/31-378-1005-1-11-2500/000  Temperature range from -50 to +180°C (PVC)  1× Pt1000 in two-wire circuit  Tolerance class according to DIN EN 60751: Class B (standard)  Connection cable end: Wire end ferrules to DIN 46228 Part 4 (standard)  Connection length in mm: 2500 mm  Extra code: without  Suitable for round and flat surfaces  Quick and uncomplicated installation  with protective fittings made of various materials  Low thermal mass  Optimum heat transfer from the measuring point to the sensor Contact resistance thermometers are ideal for precise temperature measurements on closed pipe systems and other round or flat surfaces. The uncomplicated mounting with clamping straps or hose clamps eliminates the need for mechanical processing of the measuring point.Indirect temperature measurement guarantees interference-free temperature measurement, unaffected by flow, pressure or chemical influences. Due to the low thermal mass of the measurement object, the influence is kept to a minimum. Heat-conducting paste is optionally available to optimise heat transfer.Large temperature differences between the measured medium and the environment are directly reflected in the measurement; additional insulation is recommended here.A Pt100 temperature sensor in accordance with DIN EN 60751 Class B in a two-wire circuit is fitted as standard, but variants with Pt500, Pt1000 are also possible.